Antenna Control Unit Front Panel - KNS SUPERTRACK S4 Installation And Operation Manual

5. SEARCH button – Press SEARCH for more than 3 seconds to re-search for the
current satellite. This button is also used to scroll down (▼) in the menu.
6. PWR button (Power button) – Use this button when you want to turn on/off the
antenna unit power.
7. TRACK LED – Blinking indicates that the antenna is searching for the satellite.
ON indicates that the antenna is tracking the satellite.
OFF indicates that the antenna is in the stall mode or initializing.
8. GPS LED – Blinking indicates that the antenna has distinguished the GSP but that
the GPS data is invalid.
ON indicates that the antenna is receiving valid GPS data.
OFF indicates that the GPS antenna is not installed or is malfunctioning.
9. DiSEqC LED – Blinking indicates that DiSEqC option is selected as 22KHz tone.
ON indicates that the DiSEqC option is selected as DiSEqC 1.2 to switch satellites
automatically.
OFF indicates that the DiSEqC option is disabled. Press the NEXT button to select the
next satellite manually.
10. ERROR LED – ON indicates that one or more discrete system errors have
occurred. (Refer to Error Code)
OFF indicates that no errors have occurred.
Figure 3-2 Antenna Control Unit Front Panel
23