KNS SUPERTRACK S4 Installation And Operation Manual page 50

SAT ID means satellite index like below.
ID 1~13: North America
ID 21~26: South America
ID 41~60: Europe
ID 61~74: Asia
Search Ref means S4's searching reference that used reference during the search
the satellite.
AGC THD: Search higher AGC level than preset AGC level in PCU.
C/N THD: Search higher C/N level than preset C/N level in PCU.
CLock: Search the target DVB Carrier lock.(Default)
Track Ref means S4's tracking reference that used reference during the track the
satellite.
AGC: Track the highest AGC level.(Astra2Connect default).
C/N: Track the highest C/N level.(IPcopter default).
RSSD(Receive Signal Detector): Track the highest RSSD value(Not function).
RX Polarity means RX polarity of satellite.
Horizontal/Vertical
THRD Level means threshold level if searching reference is AGC THD or C/N THD.
Polarity means voltage and tone of LNB. S4's default is 'HH'
Linear LNB(Horizontal/Vertical, High/Low)
HH(18V, 22KHz)
HL(18V, 0KHz)
VH(13V, 22KHz)
VL(13V, 0KHz)
Circular LNB(Left Handed/Right Handed, High/Low)
LH(18V, 22KHz)
LL(18V, 0KHz)
RH(13V, 22KHz)
RL(13V, 0KHz)
46