To Directive No. 90/384/Eec - Sartorius Master series User Manual

DECLARATION OF TYPE CONFORMITY
This declaration is valid for non-automatic electromechanical weighing instruments for use in legal metrology.
These weighing instruments accepted for legal metrological verification have an EC Type-Approval
Certificate. The model(s) concerned is(are) listed below along with the respective type, accuracy class, and
number of the EC Type-Approval Certificate:
Model
AC ... -0CE
LC ... -0CE
LC ... -0CE
LC ... -0CE
IC ... -0CE, LC ... -0CE
LC ... -0CE
SARTORIUS AG declares, at its sole responsibility, that its weighing instrument types comply with the regulations
of the Council Directive for Non-Automatic Weighing Instruments, No. 90/384/EEC of 20 June 1990; the
associated European Standard "Metrological aspects of non-automatic weighing instruments," No. EN 45501;
the amended, currently valid versions of the national laws and decrees concerning legal metrology and
verification in the Member States of the European Union, the E.U., and the Signatories of the Agreement on the
European Economic Area, which have adopted this Council Directive into their national laws; and with the
requirements stipulated on the Type-Approval Certificate for verification. This Declaration of Type Conformity
is valid only if the ID label on the weighing instrument has the CE mark of conformity and the green metrology
sticker with the stamped letter "M" (the two-digit number in large print stands for the year in which the mark
has been affixed):
If these marks are not on the ID label, this Declaration of Type Conformity is not valid. Validity can be
obtained by submitting the weighing instrument for final action to be taken by an authorized representative
of SARTORIUS AG.
The period of validity of this Declaration of Type Conformity is governed by the national regulations in effect
in the respective countries. Following any modifications or repairs to the weighing instrument, the said
conformity thereof must be redeclared by the authorized persons who performed such modifications/repairs.
Provided that the validity of the verification is limited pursuant to the national regulations of the individual
countries concerned, the operator of the weighing instrument shall be personally responsible for obtaining an
authorized renewal of the verification of the weighing instrument for use as a legal measuring instrument.
Signed in Goettingen on this day of 7 August 1995
Board of Management
(Dr. Laleike)
OA-113-2/08.95
7–6

to Directive No. 90/384/EEC

Type
MC BA 100
MD BA 100
MA BA 200
MD BA 200
BB BA 200
BA BA 200
C
SARTORIUS AG
37070 Goettingen
Accuracy Class EC Type-Approval Certificate No.
k
D93-09-148
k
D93-09-148
K
D93-09-149
K
D93-09-122
K
D93-09-114
K D93-09-122
Germany
Board of Management
(Dr. Schmeißer)