Information On Radio Frequency Interference; Adjusting The Display Unit; Information On Weighing Electrostatically Charged Samples - Sartorius Master series User Manual

Information on Radio Frequency Interference

!
Warning!
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
interference to radio communications. It has been
tested and found to comply with the limits for a Class
A computing device pursuant to Subpart J of Part 15
of FCC rules, which are designed to provide
reasonable protection against such interference, when
operated in a commercial environment. Operation
of this equipment in a residential area is likely
to cause interference, in which case the user, at his
own expense, will be required to take whatever
measures may be required to correct the interference.
Adjusting the Display Unit of an LC Series Balance
with a Capacity Greater Than 12 kg
Tilt the display unit to adjust it to the position
you desire.
Information on Weighing Electrostatically
Charged Samples
Problems with static electricity can occur in
environments with low humidity. To avoid these
problems when you use your balance in such
an area, wipe down the entire draft shield on both
the inside and outside with a commercially
available antistatic agent.
If you need to use electrostatically charged glass or
plastic containers that have a relatively large diameter
with balances that have a readability of 0.1 mg,
you should utilize our antistatic pan (155 mm Ø –
see "Accessories" in Part 6) instead of the standard
weighing pan.
1–12