Setting The Volume - Aastra 415 User Manual

Personalizing your phone
Setting the LED indicator
You want the attention LED to inform you of any phone incidents.
You can switch the LED on or off for the following events:
• In Service: The phone is switched on.
• Incoming call
• About: Callback, voice message, text message
• Appointment call
• Hands-free
• Low battery
The significance of the LED colours is explained in the chapter
page 34.
Settings
LED indications
<LED setting>

Setting the volume

All the ring tone properties are set using the audio profiles, see chapter
profile settings", page 85.
Setting the volume during a call
You want to adjust the volume while in a call. You have to set the volume of handset
and loudspeaker separately.
The new volume will remain stored even after the call is ended.
84
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to LED indications
Scroll to the LED setting you want and activate or deactivate it with the
softkey.
Louder: Press the upper sidekey during the call.
Quieter: Press the lower sidekey during the call.
Menu
Select softkey.
and press the Select softkey.
"Indicator LED signals",
softkey.
Select
"Audio
Aastra 622d
eud-1585/1.0 – R3.0 – 04.2013