Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6026TT-HDTRF/
HDIBXRF/HDIBQRF/6026TT-D6RF/D6IBXRF/D6IBQRF. Installation and mainte-
nance should be performed by experienced technicians only.
The SuperServer 6026TT-HD/D6 series server is a 2U Twin (two serverboards/
nodes in a 2U chassis) rackmount server based on the SC827HD-R1400B server
chassis and four Super X8DTT-HF+/X8DTT-HIBXF+/X8DTT-HIBQF+ serverboards.
The "(H)" in the product name indicates that the system is cableless.
The D6 models feature the inclusion of a daughter card with an LSI 2108 SAS 2.0
controller in each node. The main differences between the various serverboards
and the servers they are in is shown in the table below:
Model Variations (Differences between X8DTT-x Models)
IPMI 2.0 w/ KVM
Over LAN
Infi niBand
Connection
DDR IB
QDR IB
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8DTT-HF+/X8DTT-
HIBXF+/X8DTT-HIBQF+ serverboard and the SC827HD-R1400B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6026TT-
HDTRF/HDIBXRF/HDIBQRF into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without the processor
Preface
X8DTT-HF+
X8DTT-HIBXF+
Yes
Yes
No
Yes
No
Yes
No
No
iii
Preface
X8DTT-HIBQF+
Yes
Yes
No
Yes
Advertisement
Table of Contents
