Table of Contents
Advertisement
1-3
Server Chassis Features
The following is a general outline of the main features of the SC827HD-R1400B 2U
chassis. Details on the chassis can be found in Chapter 6.
System Power
When confi gured as a SuperServer 6026TT-HD/D6 series server, the SC827HD-
R1400B includes a redundant (dual) 1400W power supply, which provides power
to all four serverboards (nodes). If either power supply failes, the other will allow
the system to continue to run.
SATA Subsystem
The SC827HD-R1400B chassis was designed to support twelve SATA hard
drives, which are hot-swappable units. There are six hard drives per node in the
system.
Control Panel
The SC827HD-R1400B features two independant control panels associated with
each serverboard (node) in the chassis. Each control panel has LEDs to indicate
power on, network activity, power fail, fan fail, system overheat conditions and the
UID LED. Each control panel also includes a main power button and a UID but-
ton.
Rear I/O Panel
The SC827HD-R1400B is a 2U rackmount chassis. The rear of the chassis provides
slots for four full-height, full-length PCI Express x8 expansion cards (in x16 slots),
two COM ports, four USB ports, two VGA ports and four Gb Ethernet ports. See
Chapter 6 for details.
Cooling System
The SC827HD-R1400B chassis has an innovative cooling design that features four
8-cm high-performance fans. A fan speed control setting in BIOS allows fan speed
to be determined by system temperature. See Chapter 6 for details.
Chapter 1: Introduction
1-5
Advertisement
Table of Contents
