Outback Excel 100T Assembly And Operating Instructions Manual

Gas barbecues

Advertisement

Assembly and Operating Instructions for
Excel 100T, Excel 200T, and Excel 300T Gas Barbecues
Excel 100T
Photographs are not to scale.
Specifications subject to change
without prior notice.
x
x
x
x
x
x
WARNING
x
x

FOR YOUR SAFETY

If you smell gas:
1.
Shut off gas to the appliance.
2.
Extinguish any open flame.
3.
Open barbecue lid or hood.
4.
If odour continues, discontinue use and
contact your local dealer.
Excel 200T
For outdoor use only. Not for commercial use.
Read instructions before using the appliance. Failure to follow instructions
could result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the
instructions may be dangerous and will invalidate your warranty. This does
not affect your statutory rights.
Retain these instructions for future reference.
Leak test your barbecue annually. Check the hose connections are tight and
leak test them each time you reconnect the gas bottle.
1.
2.
Excel 300T
FOR YOUR SAFETY
Do
not
store or
use petrol or other
flammable vapours or liquids in the vicinity
of this or any other appliance.
A gas bottle not connected for use shall not
be stored in the vicinity of this or any other
appliance.
0359

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Excel 100T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Outback Excel 100T

  • Page 1: For Your Safety

    Assembly and Operating Instructions for Excel 100T, Excel 200T, and Excel 300T Gas Barbecues Excel 100T Excel 200T Excel 300T Photographs are not to scale. Specifications subject to change 0359 without prior notice. For outdoor use only. Not for commercial use.
  • Page 2: Parts List

    Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding Hardware Reference Diagram for your barbecue model. OUTBACK® OUTBACK® OUTBACK® CODE PART EXCEL 100T EXCEL 200T EXCEL 300T ¥ ¥ ¥...
  • Page 3 B1. Parts Diagram: Excel 100T Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Excel 100.’ Pre-assembled body unit includes following individual parts:...
  • Page 4 B2. Hardware Reference Diagram: Excel 100T Specifications subject to change without prior notice.
  • Page 5 C1. Parts Diagram: Excel 200T Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Excel 200.’ Pre-assembled body unit includes following individual parts:...
  • Page 6 C2. Hardware Reference Diagram: Excel 200T Specifications subject to change without prior notice.
  • Page 7 D1. Parts Diagram: Excel 300T Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Excel 300.’ Pre-assembled body unit includes following individual parts:...
  • Page 8 D2. Hardware Reference Diagram: Excel 300T Specifications subject to change without prior notice.
  • Page 9 Please lay out all nuts and bolts and check lengths before assembling. Whilst every care is taken during the manufacture of this product, care must be taken during the assembly in case sharp edges are present.  Excel 100T  Excel 200T  Excel 300T...
  • Page 10  Excel 100T  Excel 200T  Excel 300T Attach the Bottom Shelf (C22) to the Gas Bottle Holder (C17) using ST4.8x15 Screws (D6). Take care not to over tighten these screws which will damage the plastic gas bottle holder.
  • Page 11  Excel 100T  Excel 200T  Excel 300T Insert the Axle (C21) through the clamping brackets underneath the Gas Bottle Holder (C17) and tighten the clamping screws. Take care Slide the Wheels (C20) over not to over tighten these screws which will damage the plastic gas each end of the axle.
  • Page 12  Excel 100T  Excel 200T  Excel 300T Attach the Hood Handle (A2) to the Hood (A1) using the M5x10 Bolts (D2).  Excel 100T  Excel 200T  Excel 300T Carefully place the Barbecue Body (B1) onto the tops of the legs.
  • Page 13  Excel 100T  Excel 200T  Excel 300T Attach the Control Panel (B3) assembly to the trolley assembly using the M6x15 Bolts (D1).  Excel 100T  Excel 200T  Excel 300T Feed the Grease Cup Holder (B14) Insert the Grease Cup (B15) into the grease through the hole in barbecue body.
  • Page 14  Excel 100T  Excel 200T  Excel 300T Insert the Main Electrode (B10) into the hole at the bottom of the barbecue body and secure with the pre-assembled nut.  Excel 100T  Excel 200T  Excel 300T View from underneath the body.
  • Page 15  Excel 100T  Excel 200T  Excel 300T Attach the Body Heat Shield (B12) to barbecue body using the M5x10 Bolts (D2) and M5 Nuts (D8).  Excel 100T  Excel 200T  Excel 300T Carefully lay the Lava Rock (B6) into the barbecue body ensuring it lies level within the body.
  • Page 16  Excel 200T  Excel 300T Excel 100T users, skip this step and proceed directly to step 24. Attach the Side Shelf Bracket A (C4) and Side Shelf Bracket B (C5) to the Side Shelf (C3) using ST4.0x15 Screws (D5).
  • Page 17  Excel 100T  Excel 200T  Excel 300T Attach the assembled Side Shelf (C3) to the right hand side of the barbecue by sliding a Shelf Spacer (D9) onto a M6x15 Bolt (D1) and fitting the shelf to the lower fixing point on the rear leg as shown.
  • Page 18  Excel 100T  Excel 200T  Excel 300T Excel 200T users, skip this step and proceed directly to step 24. Attach the Side Burner Shelf (C8) to the left front and left rear legs using M6x15 Bolts (D1).  Excel 100T...
  • Page 19  Excel 100T  Excel 200T  Excel 300T Once the hose is connected, check to ensure that it is not in contact with the barbecue body or Body Heat Shield (B12). Loosen off the hose clip which Rotate the hose anti-clockwise...
  • Page 20 Note: there are two fixing holes for the hose tidy: Excel 100T and Excel 200T Users: please fix the hose tidy to the lower hole on the short leg front. Excel 300T Users: please fix the hose tidy to the upper hole on the short leg front.
  • Page 21: Installation

    Bottle Size Bottle Size LP gas cylinders should not be placed Outback® 3.9kg directly underneath the barbecue. Excel 100T LP gas cylinders must not be stored or used Outback® 3.9kg in the horizontal position. A leak would be Excel 200T very serious and liquid could enter the gas line.
  • Page 22: Operation

    worm drive clips or swaged fittings. Ensure no control knob to the off position and turn gas part of the flexible hose is touching any hot off at the bottle or regulator. Wait five barbecue parts. If the hose is damaged, it must minutes, then repeat the above steps.
  • Page 23: Care And Maintenance

    Outback® stockist. is opened. Even when your barbecue is covered for its I8. Side-Burner Cooking protection, it must be inspected on a regular...
  • Page 24 Replacement lava The gas bottle must be always be disconnected rock is available from your local Outback® from the barbecue and stored in a well stockist.
  • Page 25: Technical Specifications

    0.71mm LPG mixture: 37 mbar 0.69mm LPG mixture: 50 mbar Gas Consumption: Excel 100T: 446g/hr Excel 200T: 446g/hr Excel 300T: 446g/hr Side Burner: 165g/hr Countries of Use: BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT,...
  • Page 26: Troubleshooting

    L. Troubleshooting Problem Possible Cause Solution Burners will not light using LP gas bottle is empty Replace with full bottle the ignition system Faulty regulator Have regulator checked or replaced Obstructions in burners Clean burners Obstructions in gas jets or gas hose Clean jets and gas hose Electrode wire is loose or disconnected Reconnect wire...
  • Page 27 OUTBACK barbecues are warranted to the original purchaser against defects in materials and workmanship for a period of one (1) year from the date of purchase. OUTBACK UK will, within this period, supply replacements for defective parts free of charge provided that: The product has not been used for trade, professional or hire purposes.

This manual is also suitable for:

Excel 300tExcel 200t

Table of Contents