Table of Contents
Advertisement
Symbols
ITF-14
ITF-14 is a fixed length of 14 bytes Interleaved 2 of 5 barcode with Check digit. By
factory default, it is disabled.
When enabled, ITF-14 precedes 14-byte Interleaved 2 of 5 barcode.
Load ITF-14 Factory Default
【Pro CMD：99911400】
Disable ITF-14
【Pro CMD：99911401】
For instance, when ITF-14 is enabled and Interleaved 2 of 5 is disabled, the ITF-14 and 14
bytes Interleaved 2 of 5 with check digit can be read, but other Interleaved 2 of 5 can not.
If the programming of ITF-14 violates the one of Deutsche 14, ITF-14 precedes Deutsche 14.
ITF-14 Code ID
Example of setting ITF-14 Code ID to "p" (0x70)
1. Read Enable Code Programming barcode.
2. Read ITF-14 Code ID Setting barcode.
3. Read Following Barcodes: "7", and "0"
4. Read Save barcode
5. Read Disable Code Programming barcode.
nlscan.com
Enable ITF-14, Do Not Transmit Check Digit
Enable ITF-14, Transmit Check Digit
Code ID Setting
【Pro CMD：99911404】
Code Programming ON
Code Programming OFF
【Pro CMD：99911402】
【Pro CMD：99911403】
Tools
Page 80
Advertisement
Table of Contents
