Table of Contents
Advertisement
Mechanical Interface
Housing Design Considerations
Housing Structure
The housing for the Engine should make sure that no pressure should be put on the Engine. There should
have sufficient space for the flexible cable and stress release of the cable should also be considered.
Scan Window
A scan window is needed to protect camera lens and illumination lights. This scan window design should
follow:
Hous
ing must not block or shade illumination LED's aiming light, and camera lens.
»
Use high transparent and scratch resistant material.
»
The gap and angle between housing window and illumination LED (highest point) must ensure that
»
the illumination light should not be reflected into lens by window glass.
nlscan.com
Page 13
Advertisement
Table of Contents
