Symbols
UPC-E
Transmit Default "0"
The first byte of UPC-E is default to "0".
Do Not Transmit "0"
【Pro CMD:99911013】
UPC-E Expand to UPC-A
" Do Not Expand " — keep original type and digits, do not expand.
"Expand to UPC-A " — expand to UPC-A but keep code type.
" Expand Message and Convert to UPC-A" — expand code digits and convert code type.
Do Not Expand
【Pro CMD:99911015】
Expand to UPC-A
【Pro CMD:99911016】
nlscan.com
Transmit "0"
【Pro CMD:99911014】
Expand Message and Convert to UPC-A
【Pro CMD:99911017】
Tools
Code Programming ON
Code Programming OFF
Page 72