Symbols
Deutshe14
Load Factory Default
Disable/Enable Deutshe14
Enable Deutshe14,Do Not Transmit Check Digit
【Pro CMD:99911502】
Enable Deutshe14, Transmit Check Digit
【Pro CMD:99911503】
When the engine can not read Deutshe14, please read "Enable Deutshe14" and try again
If Deutsche 14 and ITF-14 are enabled at the same time, the engine may mis-decode or has
chaos in programming. So it is better to disable ITF-14 if not used.
Deutshe14 Code ID
Example of setting Deutshe14 Code ID to "p" (0x70)
1. Read Enable Code Programming barcode.
2. Read Deutshe14 Code ID Setting barcode.
3. Read Following Barcodes: "7", and "0"
4. Read Save barcode
5. Read Disable Code Programming barcode.
nlscan.com
Load Deutshe14 Factory Default
Deutshe14 Factory Default
Factory Default
【Pro CMD:99911500】
Code ID Setting
【Pro CMD:99911504】
Code Programming ON
Code Programming OFF
Disable Deutshe14
【Pro CMD:99911501】
Tools
Page 81