2.8 PC Health Status
After you have read the PC Health Status, press the <ESC> key to go
back to the main program screen.
2.9 Load Fail-Safe Defaults
This option opens a dialog box that lets you install fail-safe defaults for
all appropriate items in the whole setup utility. Use this option if you have
changed your system and it does not operate correctly or does not power
up.
2.10 Load Optimized Defaults
This option opens a dialog box that lets you install optimized defaults for
all appropriate
items in the whole Setup Utility. Press the <Y> key and then <Enter> to
install the defaults. Press the <N> key and then <Enter> to not install the
defaults. The optimized defaults place demands on the system that may
be greater than the performance level of the components, such as the CPU
and the memory. You can cause fatal errors or instability if you install the
optimized defaults when your hardware does not support them. If you
only want to install setup defaults for a specific option, select and display
that option, and then press the <F7> key.
Figure 2.8: BIOS- PC Health Status
27
Chapter 2