Hardware Description - D-Link DVG-7022S User Manual

DVG-7022S/7044S/7062 User's Manual

1-2 Hardware Description

Front Panel
Power Indicator: Green light indicates a normal power supply.
Run Indicator: Blinking green light indicates normal operation.
Alarm Indicator: When the system starts up, the red light will blink. This indicator will also light to indicate
any abnormal gateway behavior.
Voice ports indicators: Indicate connection and activity on the port 1 – 4 / 1 – 8. On the DVG-7022, P1-P2
stand for Phone1-Phone2 and L1-L2 stand for Line1-Lin2; On the DVG-7044 P1 – P4 stand for Phone1 –
Phone4 and L1-L4 stands for Line1-Line4; On the DVG-7062 P1-P6 stand for Phone1-Phone6 and L1-L2
stand for Lin1-Lin2; Phone port are connected to your analog telephone, and Line port are connected to
your original telephone line on the wall jack with RJ-11 cable.
WAN Indicators: indicate connection and activity on the WAN Ports.
L1 – L4 Indicators: indicate connection and activity on LAN Port 1 – 4.
When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40
seconds, the Alarm indicator will go off, the Run indicator will blink green, and the Power indicator
will stay green (under normal operating conditions). If the Alarm indicator continues to blink, then
the system is attempting to connect with your ISP and has yet to obtain an IP address.
Once the WAN is connected, the WAN indicator will light up green and, if data is being transmitted
over the Internet, the indicator blinks green and orange.
D-Link Systems, Inc.
Hardware Description
2