Hardware Description - D-Link DVG-2016S User Manual

DVG-2016S/2032S User's Manual

1-2 Hardware Description

Front Panel
DVG-2016S
DVG-2032S
Power Indicator: green light indicates a normal power supply.
Run Indicator: blinking green light indicates normal operation.
Alarm Indicator: when the system starts up, the red light will blink. This indicator will also light to indicate any
abnormal gateway behavior.
1 – 16/ 1 – 32 stands for Port 1 – Port 16(Phone1 – Phone16)/ Port 1 – Port 32 (Phone1 – Phone32)
WAN Indicators: indicate connection and activity on the WAN Ports.
When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40
seconds, the Alarm indicator will go off, the Run indicator will blink green, and the Power indicator
will stay green (under normal operating conditions). If the Alarm indicator continues to blink, then
the system is attempting to connect with your ISP and has yet to obtain an IP address.
Once the WAN is connected, the WAN indicator will light up and, if data is being transmitted over the
Internet, the indicator blinks.
D-Link Systems, Inc.
Hardware Description
2