Digit Map - D-Link DVG-7022S User Manual

DVG-7022S/7044S/7062 User's Manual

3-10 Digit Map

Digit Map now is combined the original feature of Digit Map and Speed Dial. You can use "?" or "%" in the
column of Scan Code, VoIP Dial-out and PSTN Dial-out. "?" is a single digit, and "%" is wildcard. It provides
a mapping between the number received from user and the replaced or modified number for real dial out.
With this function, user can easily add certain leading digits to replace full number. There are 50 sets of
leading digit entries to choose voice routing interface.
Alert if Auto fails: Tick the check box to play a voice announcement before calling out. It reminds user
that this call is through PSTN.
Enable Pound Key ' # ' Function: It is to speed up the connection of a call by entering ' # ' after a
complete phone number is dialed.
Default Call Route: The default call route can be Auto, VoIP or Deny.
Auto (VoIP first): The call route is VoIP first, and the next is PSTN.
VoIP: The call route is VoIP only.
PSTN: The call route is PSTN only.
Deny: The call will be denied.
Digit Map Testing
Test Dial No.: You have to set some rules in Digit Map Setting first and enter the number for test.
Result: The gateway will show the number for VoIP Dial-out and PSTN Dial-out according to the Digit
Map Setting as below.
D-Link Systems, Inc.
Digit Map
37