Hardware Description - D-Link DVG-6004S User Manual

DVG-6004S User's Manual

1-2 Hardware Description

Front Pannel
Indicators
Power: Power LED. A steady light indicates a proper connection to a power source.
Alm.: DVG can't get IP from DHCP or PPPoE Server. Once the service connects, the LED will turn off. The
LED will light solid red if the self-test or boot-up fails.
Reg.: The Reg. LED will turn on when the VoIP Gateway is connected to a VoIP service provider. The LED
will blinking if not connected to a service provider.
Prov. A blinking light indicates the VoIP Gateway is attempting to connect with the Provisioning server
WAN: When a connection is established LED will light up solid. The LED will blink to indicate activity. If the
LED does not light up when a cable is connected, verify the cable connections and make sure your devices
are powered on.
LAN: When a connection is established the will light up solid on the appropriate port. The LEDs will blink to
indicate activity. If the LED does not light up when a cable is connected, verify the cable connections and
make sure your devices are powered on.
Line:
Green Blinking – FXO is alerting (ringing) for an inbound call.
Green Solid – The line is in use.
Telephone Interface Description
5