D-Link DVG-7022S User Manual page 14

DVG-7022S/7044S/7062 User's Manual
BigPond (for Australia only)
Click "BigPond Cable" and enter the User Name and Password. Then click the "Accept" button at the
bottom of the screen.
(DNS) Settings
Domain Name Server (DNS): While a gateway is accessing another gateway or a computer with a
hostname, it will look up the IP address from the DNS provided by your ISP. Normally, the ISP assigns DNS
information while negotiating with PPPoE or DHCP. If the DNS is not assigned automatically or the WAN
port is assigned a static IP address, the DNS settings must be assigned manually.
Auto: the gateway learns primary and secondary addresses from the ISP's DHCP server or PPPoE server.
Manual: enter the primary and secondary addresses manually. Please be sure that the IP addresses are
correct otherwise the gateway will not be able to access hosts using hostnames instead of IPs.
WAN Link Speed
It is used to choose the WAN Ethernet link speed. The default is Auto. Please choose the same speed with
Router/Switch/Hub, if VoIP gateway connected to Router/Switch/Hub has the link problem.
Clone MAC
Some Internet Service Providers (ISPs) assign bandwidth via MAC (Media Access Control) addresses. You
can click the "Clone" button to type in a MAC address which will be recognized by your ISP. It is only
necessary to fill in the field if it is required by your ISP.
The "Your MAC Address" field will be blank as you log-in via the WAN port.
D-Link Systems, Inc.
Network Settings
10