D-Link DVG-7022S User Manual page 36

DVG-7022S/7044S/7062 User's Manual
Enable Call Feature Code: User could enable/disable some call features with a phone set.
NOTE: In most VoIP provider, please disable this function to use call features provided by SoftSwitch.
1. If you would like enable
2. If you would like
FXS #3 and dial
3. If you would
stop Unconditional Forward
4. If you would like to
FXS #3 and dial "*77#".
Calling Feature Instructions:
Call Hold: The call will be put on hold after the FLASH button is pressed on the phone set. The gateway will
play hold music (provided by your VoIP network) to the remote end.
Call Transfer: Call will be put on hold after FLASH button pressed on local phone set (gateway plays
on-hold music to the remote end). Meanwhile, the local user can dial out to another number after dial tone is
observed. After the handset is replaced back on-hook, the call on hold will then be transferred to the new
call regardless of the status of the new call. If the wrong number is dialed for the new call, just press the
FLASH button to get back the call on hold. In another case, if the local user doesn't hang up the phone after
the new call is set up, press the FLASH button to switch between the first call and the new call. Please be
informed that the PBX between phone sets and the gateway must support FLASH features in order to use
this function. If a phone set is connecting directly to the FXS port of the gateway and not functioning to
FLASH, please adjust the settings in "Flash Detect Time" in "Advanced Options" section.
Examples of establishing a Three-Way call:
1. Phone1 dials to Phone2, Phone2 answers the call.
2. Phone1 presses Flash then calls Phone3 (Phone2 is on hold) and Phone3 answers the call.
3. Phone1 dials *61 and then presses Flash to start the conference call.
Or
4. Phone1 dials to Phone2, Phone2 answers the call.
5. Phone3 dials to Phone1 (Call Waiting), Phone1 presses Flash to pick up the second call and talk to
Phone3.
6. Phone1 dials *61 and then presses Flash to start the conference call.
NOTE: The availability of the above features also depends on your VoIP network. Please also
check with your service provider on these services.
D-Link Systems, Inc.
function of FXS #2. Please pickup FXS #2 and dial "*74#"
DND
enable Unconditional Forward
"*77 0912345678#". 0912345678 is the number you would like forward to.
enable Unconditional Forward
of FXS #3 and assign the number. Please pickup
of FXS #3. Please pickup FXS #3 and dial "#77#"
again, but the number is the same. Please pickup
Calling Features
32