PaceMaster Silver XRC Owner's Manual page 16

8. Assemble and Install the Pedals
Step 8A:
Install the toe straps on the pedals as shown
in Fig A to the right.
Step 8B:
The pedals are stamped on the threaded end
of the axle with the letter "R" and "L" for Right
and Left respectively. Right and Left sides
are determined as seated on the recumbent
bike. Install the Right pedal on the Right
crank arm using the included wrench (117) or
a 15 mm wrench. Install the Left pedal on
the Left crank arm using the included wrench
(117) or a 15 mm wrench. NOTE: The
Left pedal is reverse thread (you must turn
it counter-clockwise to tighten it).
16