On-Screen Display (Osd) - Elo TouchSystems 2401LM Touchmonitor User Manual

(for example images containing small-font text).
Your Touchmonitor will likely not require video adjustments. However, for analog VGA video, variations
in video graphic card outputs may require user adjustments through the OSD to optimize the quality of
the Touchmonitor's displayed image. These adjustments are "remembered" by the Touchmonitor. Also,
to reduce the need for adjustments for different video mode timings, the monitor correctly scales and
displays some of the video industry's most common video timing modes. Refer to the technical
specifications for this monitor at http://www.elotouch.com for a list of these Preset Video Modes.

On-Screen Display (OSD)

Four OSD buttons are on the bottom of the monitor. These can be used to adjust various display
parameters.
The buttons and their functionality are:
Button Function when OSD is not displayed:
Menu Display OSD main menu
Display OSD Contrast submenu
Display OSD Brightness submenu
Select Enter"Auto Adjust" feature(VGA mode only) Select submenu to enter
Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
Parameter
Increase/decrease monitor contrast.
Contrast
Default: best gray-shade performance
Increase/decrease monitor brightness.
Brightness
Default: maximum
Moves the image vertically on the display in single-pixel increments.
V-position Default: centered.
Only applicable for VGA input video
Moves the image horizontally on the display in single-pixel increments.
H-position Default: centered.
Only applicable for VGA input video
Recall Selecting "Recall Defaults" restores all factory default settings for OSD-adjustable
Defaults parameters (except OSD Language) and for Preset Video Mode timings.
© 2013 Elo Touch Solutions, Inc. All rights reserved.
Function when OSD is displayed:
Return to previous OSD menu
Increase value of selected parameter /
select next menu item
Decrease value of selected parameter /
select previous menu item
Available Adjustment
User Manual 2401LM
SW200127 Rev A - Page 20 of 32