Page: 125
Service Manual - OKIPAGE10i
Chapter E Multi-Purpose Feeder Maintenance
(1) Turn the power switch off "O" and remove the connector cable.
(2) Disengage the link and paper feeder cover (see 3.3.1).
(3) Remove (2) screws (1), disengage the locks at (2) locations on the upper frame (2) with a screwdriver,
and remove the upper frame (2).
(4) Remove (2) screws (3), and take out the separator assembly (4).
(5) Disengage the separator (7) from the separator bracket (6) while lifting the paper hold (5), and take out
the separator (be careful not to lose the spring (8) when you are doing this).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)