Oki OKIPAGE 10i Service Manual page 82

Page: 49
Service Manual - OKIPAGE10i
Chapter 3 Parts Replacement
(1) Remove the paper cassette.
(2) Remove the upper cover assy (see 3.3.1).
(3) Remove the lower base unit (see 3.3.5).
(4) Remove the M5B-PCB (see 3.3.21).
(5) Remove two screws (1), and remove the guide rails (2).
(6) Remove the screw (3), and remove the cassette guide R (4) by shifting it in the direction of arrow.
(7) Remove the cassette lock lever (5) and torsion spring (6).
(8) Remove the cassette lock lever spring (9), then remove the sheet link (R) (7) and link pull block (8).
(9) Remove two screws (10), and remove the square-shaped connector (11).