Oki OKIPAGE 10i Service Manual page 77

Page: 46
Service Manual - OKIPAGE10i
Chapter 3 Parts Replacement
1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the connectors (CN1 and CN2).
(5) Remove two screws (1), and remove the transformer (2).
Note: When reinstalling the transformer, be sure to lay the AC and transformer's primary side cables
under the divider (see view A diagram below).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)