Oki OKIPAGE 10i Service Manual page 57

Page: 29
Service Manual - OKIPAGE10i
Chapter 3 Parts Replacement
(1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the connecting cables (2) and (3) of the pulse motors from the connectors (DM, RM) of the
M5B-PCB 1.
(5) Remove the LED head cables (4) and (5) from the connectors (HEAD1, HEAD2).
(6) Open the manual feed guide assy, remove six screws (7), then remove the lower base unit (6).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)