Discard Changes And Exit; Save Changes And Reset; Discard Changes And Reset; Save Changes - Avalue Technology EMX-CDV User Manual

User's Manual

3.6.6.2 Discard Changes and Exit

Use the Discard changes and Exit option to exit the system without saving the changes
made to the BIOS configuration setup program.

3.6.6.3 Save Changes and Reset

Any changes made to BIOS settings are stored in NVRAM. The setup program then exits
and reboots the controller.

3.6.6.4 Discard Changes and Reset

Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The setup program then exits and reboots the controller.

3.6.6.5 Save Changes

Changes made to BIOS settings during this session are committed to NVRAM. The setup
program remains active, allowing further changes.
3.6.6.6 Discard Changes
Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The BIOS setup continues to be active.

3.6.6.7 Restore Defaults

This option restores all BIOS settings to the factory default. This option is useful if the
controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.

3.6.6.8 Save as user defaults

This option saves a copy of the current BIOS settings as the User Defaults. This option is
useful for preserving custom BIOS setup configurations.

3.6.6.9 Restore user defaults

This option restores all BIOS settings to the user defaults. This option is useful for restoring
previously preserved custom BIOS setup configurations.

3.6.6.10 Boot override

This option lists all possible bootable devices and allows the user to override the Boot
EMX-CDV User's Manual 59