Subscribe to Our Youtube Channel
Related Manuals for Avalue Technology EMX-ZXEDP
Summary of Contents for Avalue Technology EMX-ZXEDP
- Page 1 EMX-ZXEDP Onboard Zhaoxin E KX-6000 series 4 core BGA CPU up to 35W Mini ITX Motherboard User’s Manual Ed – 11 December 2020 Part No. E2047MXZX00R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EMX-ZXEDP User’s Manual...
-
Page 5: Table Of Contents
2.3.20 Serial Port2 RS485/422 Mode connector (JRS485_1) ..............30 2.3.21 Serial Port2 RS485/422 Mode connector (JRS485_2) ..............31 2.3.22 Front Audio connector (FAUD1) ....................31 2.3.23 SMBus connector (JSMB1) ......................32 2.3.24 PS/2 keyboard & mouse header (KBMS1) ..................32 EMX-ZXEDP User’s Manual... - Page 6 Intel(R) I210 Gigabit Network Connection – 00:04:5F:A8:17:DE .......... 55 3.6.2.11 3.6.2.11.1 NIC Configuration ........................55 Intel(R) I210 Gigabit Network Connection – 00:04:5F:A8:17:DF .......... 56 3.6.2.12 3.6.2.12.1 NIC Configuration ........................57 Intel(R) I210 Gigabit Network Connection – 00:04:5F:A8:17:E0 ........... 58 3.6.2.13 6 EMX-ZXEDP User’s Manual...
- Page 7 Launch EFI Shell from filesystem device ................71 4. Drivers Installation....................... 72 Install VGA Driver ....................73 Install Audio Driver ....................74 Install LAN Driver ....................75 Install Fintek Serial Patch Driver ................77 5. Mechanical Drawing ....................78 EMX-ZXEDP User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EMX-ZXEDP motherboard 1 x SATA cables 1 x I/O Shield ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment December 2020 Avalue Initial Release EMX-ZXEDP User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up EMX-ZXEDP or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
2 x 2 x 3 pin, pitch 2.00mm connector for COM 1~2 support RS232 with Pin 9,+5V/+12V/RI by jumper 2 x 2 x 3 pin, pitch 2.00mm connector for COM 1~2 support RS422/485 connector, Pin 5 with +5V EMX-ZXEDP User’s Manual 11... - Page 12 Triple Display (2 display with clone mode, 1 display with extend mode) Multiple Display Default: LVDS/HDMI + HDMI+VGA Audio Audio Codec Realtek ALC892 HD Audio Decoding Controller Amplifier TI TPA3113D2PWP Stereo Class-D 6W x 2 Ethernet LAN Chipset 2 x Intel® I210AT co-lay I211AT PCI-e Gigabit Ethernet 12 EMX-ZXEDP User’s Manual...
- Page 13 Random vibration test (Non-operation) 1 PSD: 0.01818G²/Hz , 3.0 Grms 2 Non-Operation mode 3 Test Frequency : 5-500Hz 4 Test Axis : X,Y and Z axis 5 30 min. per each axis 6 IEC 60068-2-64 Test:Fh EMX-ZXEDP User’s Manual 13...
- Page 14 Please refer to Avalue Board Product Design Verification report for detail data. NeoKylin: a. EMX-ZXEDP default OS/BIOS in Windows, if customer would like to use NeoKylin, please contact sales and FAE. b. Burn-in test in NeoKylin may show COM port error within 24 hours, which limitation result from lack of EC 128 Byte FIFO version and Linux patch driver support.
-
Page 15: Architecture Overview-Block Diagram
User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-ZXEDP. EMX-ZXEDP User’s Manual 15... -
Page 16: Expansion Design
EMX-ZXEDP User’s Manual 1.7 Expansion design Expansion Design – Gold Finger 16 EMX-ZXEDP User’s Manual... -
Page 17: Hardware Configuration
User’s Manual 2. Hardware Configuration EMX-ZXEDP User’s Manual 17... -
Page 18: Product Overview
EMX-ZXEDP User’s Manual 2.1 Product Overview 18 EMX-ZXEDP User’s Manual... -
Page 19: Jumper And Connector List
(with smart fan function supported) Miscellaneous setting connector 4 x 2 header, pitch 2.00mm JSPI1 EC Debug 2 x 1 header, pitch 2.00 mm JEC_DEBUG1 COM1/2 Serial Port2 connector 1/2 5 x 2 header, pitch 2.00 mm EMX-ZXEDP User’s Manual 19... - Page 20 3 x 2 header, pitch 2.00 mm USB3/4 USB connector 3/4 SODIMM1/2 206-pin DDR4 SO-DIMM socket LAN1/2-3 RJ-45 Ethernet 1/2-3 DCIN1 DC Power-in connector HDMI1/2 HDMI connector 1/2 HEATSINK1 ZX-200 heatsink Gold Finger SIM1 SIM card slot 20 EMX-ZXEDP User’s Manual...
-
Page 21: Setting Jumpers & Connectors
User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1 pin9 signal select (JRI1) Ring* +12V * Default 2.3.2 Serial port 1 pin9 signal select (JRI2) Ring* +12V * Default EMX-ZXEDP User’s Manual 21... -
Page 22: Clear Cmos (Jcmos1)
EMX-ZXEDP User’s Manual 2.3.3 Clear CMOS (JCMOS1) Protect* Clear CMOS * Default 2.3.4 AT/ATX Power Mode Select (JSATX1) * Default 22 EMX-ZXEDP User’s Manual... -
Page 23: Lvds Back Light Power Selection (Jsbkl1)
User’s Manual 2.3.5 LVDS Back Light power selection (JSBKL1) PWM Mode* DC Mode * Default 2.3.6 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_DATA_VCC 18 17 SMB_CLK_VCC EMX-ZXEDP User’s Manual 23... -
Page 24: Power Connector (Pwr1)
EMX-ZXEDP User’s Manual 2.3.7 Power connector (PWR1) Signal PIN PIN Signal +VDC12_26V +VDC12_26V 2.3.8 SATA Power connector (SPWR1) Signal +V5S_SATA1 +V12S_SATA1 24 EMX-ZXEDP User’s Manual... -
Page 25: Usb Connector (Usb1)
User’s Manual 2.3.9 USB connector (USB1) Signal PIN PIN Signal +V5A__HUB1-4 +V5A__HUB1-4 USB_PN0__R USB_PN1__R USB_PP0__R USB_PP1_R 2.3.10 USB connector (USB2) Signal USB_PP2_R USB_PN2__R +V5A__HUB1-4 EMX-ZXEDP User’s Manual 25... -
Page 26: Lpc Connector (Jlpc1)
EMX-ZXEDP User’s Manual 2.3.11 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PCIRST# LPC_AD2 LPC_LFRAME# LPC_AD3 CLK_33M_LPC LPC_SERIRQ 2.3.12 Miscellaneous setting connector (JSPI1) Signal PIN PIN Signal + V3.3A_SPI SPI_CS0# SPI_CLK SPI_MISO SPI_MOSI SPI_HOLD# SPI_WP# 26 EMX-ZXEDP User’s Manual... -
Page 27: Speaker Connector (Spk1)
User’s Manual 2.3.13 Speaker connector (SPK1) Signal LSPK+ LSPK- RSPK+ RSPK- 2.3.14 Front Panel connector (FPT1) Signal PIN PIN Signal FP_PWR_BTN_EC# EXT_SYSRST# PWR_LED- HDD_LED- PWR_LED+ HDD_LED+ EMX-ZXEDP User’s Manual 27... -
Page 28: Front Panel Connector (Fpt2)
EMX-ZXEDP User’s Manual 2.3.15 Front Panel connector (FPT2) Signal PIN PIN Signal SPKR- BLK_BRI_DN# BLK_BRI_UP# BLK_VR_MOD SPKR+ 2.3.16 System fan connector 1 (JFAN1) Signal +V12S_FAN1 CPUFANIN FAN_PWM0 28 EMX-ZXEDP User’s Manual... -
Page 29: System Fan Connector 2 (Jfan2)
User’s Manual 2.3.17 System fan connector 2 (JFAN2) Signal +V12S_FAN2 SYSFANIN FAN_PWM1 2.3.18 Serial port connector (COM1) Signal PIN PIN Signal COM_RI#_1 COM_CTS#_1 COM_RTS#_1 COM_DSR#_1 COM_DTR#_1 COM_TXD_1 COM_RXD_1 COM_DCD#_1 EMX-ZXEDP User’s Manual 29... -
Page 30: Serial Port Connector (Com2)
EMX-ZXEDP User’s Manual 2.3.19 Serial port connector (COM2) Signal PIN PIN Signal COM_RI#_2 COM_CTS#_2 COM_RTS#_2 COM_DSR#_2 COM_DTR#_2 COM_TXD_2 COM_RXD_2 COM_DCD#_2 2.3.20 Serial Port2 RS485/422 Mode connector (JRS485_1) Signal PIN PIN Signal 485_422TX1- 422RX1- 485_422TX1+ 422RX1+ 30 EMX-ZXEDP User’s Manual... -
Page 31: Serial Port2 Rs485/422 Mode Connector (Jrs485_2)
User’s Manual 2.3.21 Serial Port2 RS485/422 Mode connector (JRS485_2) Signal PIN PIN Signal 485_422TX2- 422RX2- 485_422TX2+ 422RX2+ 2.3.22 Front Audio connector (FAUD1) Signal PIN PIN Signal LINEOUT1 _JD LINEOUT_L MIC1_JD LINEOUT_R ACZ_DET# MIC1_RIN MIC1_LIN EMX-ZXEDP User’s Manual 31... -
Page 32: Smbus Connector (Jsmb1)
EMX-ZXEDP User’s Manual 2.3.23 SMBus connector (JSMB1) Signal +SMB_3.3V SMBALRT#_S SMB_CLK_S SMB_DATA_S 2.3.24 PS/2 keyboard & mouse header (KBMS1) Signal PIN PIN Signal MSCLK MSDAT +V5A_KBMS KBCLK KBDAT 32 EMX-ZXEDP User’s Manual... -
Page 33: Lcd Inverter Connector (Jbkl1)
User’s Manual 2.3.25 LCD Inverter connector (JBKL1) Signal LVDS_BKLTCTL LVDS_BKLT_EN +V12S_INV 2.3.26 EC Debug (JEC_DEBUG1) Signal EC_SMCLK EC_SMDAT EMX-ZXEDP User’s Manual 33... -
Page 34: Edp-Panel Connector (Edp 1)
PIN PIN Signal EDP_PanelTXN0 EDP_PanelTXN3 EDP_PanelTXP0 EDP_PanelTXP3 EDP_PanelTXN1 EDP_PanelTXP1 11 12 EDP_PanelAUXN 14 EDP_PanelAUXP EDP_PanelTXN2 15 EDP_PanelTXP2 17 EDP_Panel_HPD EDP_VCC_PAL EDP_VCC_PAL 2.3.28 JVGA1 connector (JVGA1) Signal PIN PIN Signal CRT_Z_RED +V5S_VGA CRT_Z_GREEN CRT_Z_BLUE CRT_Z_DDC_CLK CRT_Z_DDC_DATA CRT_Z_VSYNC CRT_Z_HSYNC 34 EMX-ZXEDP User’s Manual... -
Page 35: Lvds Connector (Lvds1)
10 LVDS_DATA0_P LVDS_DATA1_N 11 12 LVDS_DATA0_N LVDS_DATA3_P 15 16 LVDS_DATA2_P LVDS_DATA3_N 17 18 LVDS_DATA2_N LVDS_DATA5_P 21 22 LVDS_DATA4_P LVDS_DATA5_N 23 24 LVDS_DATA4_N LVDS_DATA7_P 27 28 LVDS_DATA6_P LVDS_DATA7_N 29 30 LVDS_DATA6_N LVDS_CLK2_P LVDS_CLK1_P LVDS_CLK2_N LVDS_CLK1_N +V12S_LVDS +V12S_LVDS EMX-ZXEDP User’s Manual 35... -
Page 36: Serial Port3-6 Connector (Com3-6)
Signal PIN PIN Signal COM_DCD_3 COM_RXD_3 COM_TXD_3 COM_DTR#_3 COM_DSR#_3 COM_RTS#_3 COM_CTS#_3 COM_RI#_3 COM_DCD_4 COM_RXD_4 COM_TXD_4 COM_DTR#_4 COM_DSR#_4 COM_RTS#_4 COM_CTS#_4 COM_RI#_4 COM_DCD_5 COM_RXD_5 COM_TXD_5 COM_DTR#_5 COM_DSR#_5 COM_RTS#_5 COM_CTS#_5 COM_RI#_5 COM_DCD_6 COM_RXD_6 COM_TXD_6 COM_DTR#_6 COM_DSR#_6 COM_RTS#_6 COM_CTS#_6 COM_RI#_6 36 EMX-ZXEDP User’s Manual... -
Page 37: Bios Setup
User’s Manual 3.BIOS Setup EMX-ZXEDP User’s Manual 37... -
Page 38: Introduction
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP 38 EMX-ZXEDP User’s Manual... -
Page 39: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. EMX-ZXEDP User’s Manual 39... -
Page 40: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 40 EMX-ZXEDP User’s Manual... -
Page 41: Bios Setup
Use the system time option to set the system time. Manually enter the hours, minutes and seconds. Note: The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. EMX-ZXEDP User’s Manual 41... -
Page 42: Advanced Menu
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.1 Trusted Computing 42 EMX-ZXEDP User’s Manual... -
Page 43: Acpi Settings
Select the highest ACPI sleep state the Suspend Disabled[Default], ACPI Sleep State system will enter when the SUSPEND button S3 (Suspend to RAM) is pressed. Disabled[Default], Enables or Disables Lock of Legacy Lock Legacy Resources Enabled Resources EMX-ZXEDP User’s Manual 43... -
Page 44: Super Io Configuration
Set Parameters of Serial Port 3 (COMC). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD). Serial Port 5 Configuration Set Parameters of Serial Port 5 (COME). Serial Port 6 Configuration Set Parameters of Serial Port 6 (COMF). 44 EMX-ZXEDP User’s Manual... -
Page 45: Serial Port 1 Configuration
3.6.2.3.1 Serial Port 1 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], RS232[Default], UART 232 422 485 RS422 Change the Serial Port as RS232/422/485 RS485 3.6.2.3.2 Serial Port 2 Configuration EMX-ZXEDP User’s Manual 45... -
Page 46: Serial Port 3 Configuration
Enable or Disable Serial Port (COM). Enabled[Default], RS232[Default], UART 232 422 485 RS422 Change the Serial Port as RS232/422/485 RS485 3.6.2.3.3 Serial Port 3 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 46 EMX-ZXEDP User’s Manual... -
Page 47: Serial Port 4 Configuration
User’s Manual 3.6.2.3.4 Serial Port 4 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 3.6.2.3.5 Serial Port 5 Configuration EMX-ZXEDP User’s Manual 47... -
Page 48: Serial Port 6 Configuration
EMX-ZXEDP User’s Manual Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 3.6.2.3.6 Serial Port 6 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 48 EMX-ZXEDP User’s Manual... -
Page 49: Ec 8528 Hw Monitor
User’s Manual 3.6.2.4 EC 8528 HW monitor Item Option Description Disabled Smart Fan Function Enable or Disable Smart Fan Enabled[Default], 3.6.2.4.1 Smart Fan Configuration EMX-ZXEDP User’s Manual 49... - Page 50 Mode 07 Mode 08 Mode 09 System Smart Fan Mode 10 System Smart Fan Mode Select Mode Mode 11 Mode 12 Mode 13 Mode 14 Mode 15[Default], Mode 16 Mode 17 Mode 18 Mode 19 Mode 20 50 EMX-ZXEDP User’s Manual...
-
Page 51: S5 Rtc Wake Settings
Enable or disable System wake on alarm event. Select Disabled[Default], FixedTime, system will wake on the hr::min::sec Wake system from S5 Fixed Time specified. Select DynamicTime, System will wake on Dynamic Time the current time + Increase minute(s). 3.6.2.6 CPU Configuration EMX-ZXEDP User’s Manual 51... -
Page 52: Usb Configuration
10 sec transfers. 20 sec[Default] 10 sec 20 sec[Default] USB mass storage device Start Unit command Device reset time-out 30 sec time-out. 40 sec Device power-up delay Auto[Default] Maximum time the device will take before it 52 EMX-ZXEDP User’s Manual... -
Page 53: Csm Configuration
Forced FDD format. Optical drives are emulated as 'CDROM' Hard Disk drives with no media will be emulated according CD-ROM to a drive type. 3.6.2.8 CSM Configuration Item Options Description Disabled[Default], CSM Support Enable/Disable CSM Support Enabled EMX-ZXEDP User’s Manual 53... -
Page 54: Nvme Configuration
EMX-ZXEDP User’s Manual 3.6.2.9 NVMe Configuration 3.6.2.10 Network Stack Configuration Item Options Description Disabled[Default], Network Stack Enable/Disable UEFI Network Stack. Enabled 54 EMX-ZXEDP User’s Manual... -
Page 55: Intel(R) I210 Gigabit Network Connection - 00:04:5F:a8:17:De
User’s Manual 3.6.2.11 Intel(R) I210 Gigabit Network Connection – 00:04:5F:A8:17:DE Item Options Description Identify the physical network port by blinking Blink LEDs the associated LED 3.6.2.11.1 NIC Configuration EMX-ZXEDP User’s Manual 55... -
Page 56: Intel(R) I210 Gigabit Network Connection - 00:04:5F:a8:17:Df
Enables the server to be powered on using an Disabled[Default], Wake On LAN Enabled in-band magic packet. 3.6.2.12 Intel(R) I210 Gigabit Network Connection – 00:04:5F:A8:17:DF Item Options Description Identify the physical network port by blinking Blink LEDs the associated LED 56 EMX-ZXEDP User’s Manual... -
Page 57: Nic Configuration
Specifics the port speed used for the selected Link Speed 10 Mbps Full boot protocol. 100 Mbps Half 100 Mbps Full Enables the server to be powered on using an Disabled[Default], Wake On LAN Enabled in-band magic packet. EMX-ZXEDP User’s Manual 57... -
Page 58: Intel(R) I210 Gigabit Network Connection - 00:04:5F:a8:17:E0
EMX-ZXEDP User’s Manual 3.6.2.13 Intel(R) I210 Gigabit Network Connection – 00:04:5F:A8:17:E0 Item Options Description Identify the physical network port by blinking Blink LEDs the associated LED 3.6.2.13.1 NIC Configuration 58 EMX-ZXEDP User’s Manual... -
Page 59: Chipset
Specifics the port speed used for the selected Link Speed 10 Mbps Full boot protocol. 100 Mbps Half 100 Mbps Full Enables the server to be powered on using an Disabled[Default], Wake On LAN Enabled in-band magic packet. 3.6.3 Chipset EMX-ZXEDP User’s Manual 59... -
Page 60: North Bridge
EMX-ZXEDP User’s Manual 3.6.3.1 North Bridge 3.6.3.1.1 Video Configuration Item Option Description Disabled[Default], Dual VGA Enable Dual VGA Enable/Disable Enabled 60 EMX-ZXEDP User’s Manual... -
Page 61: Pcie Configuration
Subsystem Setting -> PCIE GEN2 Setting By Port[Default], ->Target Link Speed Disabled PCIE Root Port PCIE Root Port Enabled[Default], Disabled PCIE Port 10 for GFx1 PCIE PE0 can't be PCIE PE0 Control(GF x1) Enabled[Default], disabled when PE1/PE2/PE3 is enabled EMX-ZXEDP User’s Manual 61... -
Page 62: South Bridge
HUB: Port 1,2: USB Port 4 Port 3: Golden PCIE PE6 Control(USB3.0 HUB) Enabled[Default], Finger Port 4: M.2 Key-B PCIE PE6 can't be disabled when PE7 is enabled Disabled PCIE PE7 Control(mPCIE) PCIE Port 1 for Mini PCIE Slot Enabled[Default], 3.6.3.2 South Bridge 62 EMX-ZXEDP User’s Manual... -
Page 63: Usb Configuration
User’s Manual 3.6.3.2.1 USB Configuration Item Option Description Disabled Usb S4 WakeUp Control Usb S4 WakeUp Enable/Disable selection Enabled[Default], Disabled Usb OC Enable/Disable Usb OC Enable/Disable selection Enabled[Default], 3.6.3.2.2 SATA Configuration EMX-ZXEDP User’s Manual 63... -
Page 64: Hdac Configuration
Gen1/ Gen2/ Gen3 Gen3[Default], MB SATA[Default], Select SATA1 to MB or GF board Select SATA1 to MB or GF board GF Board SATA 3.6.3.2.3 HDAC Configuration Item Option Description Disabled OnChip HDAC Device HDAC Control Enabled[Default], 64 EMX-ZXEDP User’s Manual... -
Page 65: Board & Panel Configuration
Panel Brightness Control Method. 1.BIOS Panel Brightness Control Method BR Button 2.Brightness Button 3.Variable Resistor 4. OS Driver Panel Brightness Select Panel back light PWM duty. 100%[Default], 200[Default], Panel Back Light PWM Frequency Select Panel back light PWM Frequency. EMX-ZXEDP User’s Manual 65... -
Page 66: Security
Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min Disabled Wake Up by Ring Wake Up by Ring from S3/S4/S5 Enabled[Default], Disabled Enable/Disable USB Standby Power USB Standby Power Enabled[Default], during S3/S4/S5 3.6.4 Security 66 EMX-ZXEDP User’s Manual... -
Page 67: Secure Boot
The mode change requires platform reset Secure Boot mode options: Standard or Custom. In Standard Custom mode, Secure Boot Policy variables can be Secure Boot Mode Custom[Default], configured by a physically present user without full authentication EMX-ZXEDP User’s Manual 67... -
Page 68: Restore Factory Keys
EMX-ZXEDP User’s Manual 3.6.4.1.1 Restore Factory Keys 3.6.4.1.2 Key Management 68 EMX-ZXEDP User’s Manual... -
Page 69: Boot
On[Default] Bootup NumLock State Select the keyboard NumLock state. Disabled[Default] Quiet Boot Enable or disable Quiet Boot option. Enabled Boot Option #1 Sets the system boot order Boot Option #2 Sets the system boot order EMX-ZXEDP User’s Manual 69... -
Page 70: Save & Exit
3.6.6 Save & Exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are 70 EMX-ZXEDP User’s Manual... -
Page 71: Restore Defaults
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. EMX-ZXEDP User’s Manual 71... -
Page 72: Drivers Installation
EMX-ZXEDP User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 72 EMX-ZXEDP User’s Manual... -
Page 73: Install Vga Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go Step 1. Click Next to continue installation. Step 2. Click Reboot Now. EMX-ZXEDP User’s Manual 73... -
Page 74: Install Audio Driver
All drivers can be found on the Avalue Official Website: http://www.avalue.com.tw. Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step1. Click Next to Install. Step 2. Select Finish to complete Installation. 74 EMX-ZXEDP User’s Manual... -
Page 75: Install Lan Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click No. Step 5. Click Install. Step 2. Click Next to continue installation. EMX-ZXEDP User’s Manual 75... - Page 76 EMX-ZXEDP User’s Manual Step 6. Click Finish to complete setup. 76 EMX-ZXEDP User’s Manual...
-
Page 77: Install Fintek Serial Patch Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Ok. Step3. Click Install. Step 2. Click Next. Step 4. Click Finish to complete setup. EMX-ZXEDP User’s Manual 77... -
Page 78: Mechanical Drawing
EMX-ZXEDP User’s Manual 5. Mechanical Drawing 78 EMX-ZXEDP User’s Manual... - Page 79 User’s Manual Unit: mm EMX-ZXEDP User’s Manual 79...
- Page 80 EMX-ZXEDP User’s Manual Unit: mm 80 EMX-ZXEDP User’s Manual...
Need help?
Do you have a question about the EMX-ZXEDP and is the answer not in the manual?
Questions and answers