Subscribe to Our Youtube Channel
Related Manuals for Avalue Technology EMX-BYT3
Summary of Contents for Avalue Technology EMX-BYT3
- Page 1 EMX-BYT3 Intel ® Atom™ Celeron® J1900 D1 Processor Mini ITX Motherboard User’s Manual Ed –17 April 2019 Part No. E2047MXT301R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
-
Page 3: Technical Support
Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. -
Page 4: Product Warranty
A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EMX-BYT3 User’s Manual... -
Page 5: Table Of Contents
2.3.18 EC_Program (EC1) ........................29 2.3.19 PS/2 keyboard & mouse connector (KBMS1) ................29 2.3.20 BIOS connector (BIOS1) ....................... 30 2.3.21 Sony/Philips Digital Interface (SPDIF1) ..................30 2.3.22 Speaker connector (SPK1) ......................31 2.3.23 Miscellaneous setting connector 1 (FPT1) ..................31 EMX-BYT3 User’s Manual... - Page 6 3.6.2.7.1 Socket 0 CPU Information ..................... 51 3.6.2.8 PPM Configuration......................... 51 3.6.2.9 IDE Configuration ........................52 3.6.2.10 Network Stack Configuration ....................53 3.6.2.11 CSM Configuration ........................ 53 3.6.2.12 USB Configuration ......................... 54 3.6.2.13 Security Configuration ......................55 6 EMX-BYT3 User’s Manual...
- Page 7 Install Chipset Driver ....................68 Install TXE Driver ....................69 Install VGA Driver ....................70 Install Audio Driver ....................71 Install Ethernet Driver ....................72 Install USB 3.0 Driver ....................73 Install MBI Driver ..................... 74 5. Mechanical Drawing ....................75 EMX-BYT3 User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EMX-BYT3 motherboard 2 x SATA cables 1 x I/O Shield ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment December 2017 Avalue Initial Release April 2019 Avalue Update EMX-BYT3 Description EMX-BYT3 User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up EMX-BYT3 or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
Realtek ALC662 HD Audio Decoding Controller Audio Amp Realtek ALC105 3W x 2 Audio Codec Realtek ALC662 HD Audio Decoding Controller with 3W Amplifier Ethernet LAN Chip 2 x Intel I211AT PCI-Express Gigabit Ethernet Ethernet 10/100/1000 Gigabit Ethernet Interface EMX-BYT3 User’s Manual 11... - Page 12 1 x 2 x 5 pin, pitch 2.54mm connector for front Audio 1 x 3 pin, pitch 2.54mm connector for S/PDIF 1 x 4 pin, pitch wafer 2.00mm connector for 3W x 2 Speaker 1 x 2 x 5 pin, pitch 2.00mm connector for Keyboard & Mouse 12 EMX-BYT3 User’s Manual...
- Page 13 Humidity Size (L x W) 6.7" x 6.7" (170mm x 170mm) Weight 0.4 kg BIOS Support: OS Support 1. Win7 64bit CSM mode 2. Win 10 UEFI mode Note: Specifications are subject to change without notice. EMX-BYT3 User’s Manual 13...
-
Page 14: Architecture Overview-Block Diagram
EMX-BYT3 User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-BYT3. 14 EMX-BYT3 User’s Manual... -
Page 15: Hardware Configuration
User’s Manual 2. Hardware Configuration EMX-BYT3 User’s Manual 15... -
Page 16: Product Overview
EMX-BYT3 User’s Manual 2.1 Product Overview 16 EMX-BYT3 User’s Manual... -
Page 17: Jumper And Connector List
4 x 1 wafer, pitch 2.54mm FAN1 CPU fan connector FPT1 Miscellaneous setting connector 1 5 x 2 header, pitch 2.54 mm FPT2 Miscellaneous setting connector 2 5 x 2 header, pitch 2.54 mm DIMM1/2 204-pin DDR3L DIMM socket EMX-BYT3 User’s Manual 17... - Page 18 Serial ATA connector 1/2 SPWR1/2 SATA Power connector 1/2 4 x 1 wafer, pitch 2.54mm EC_Program 5 x 2 header, pitch 2.00 mm HDMI1 HDMI connector LOUT1 Line-out audio jack MIC1 Mic-in audio jack VGA1 VGA connector 18 EMX-BYT3 User’s Manual...
-
Page 19: Setting Jumpers & Connectors
* Default 2.3.2 SATA2/MSATA1 mPCIe slot selector (JMSW1) SATA2 Connector* (SATA2 Connector enabled, MSATA1 slot Disabled) MSATA1 mPCIe slot (MSATA1 slot enabled, SATA2 Connector Disabled) * Default Note: SATA2/MSATA1 shared SATA signal, can not be used simultaneously. EMX-BYT3 User’s Manual 19... -
Page 20: Lvds Back Light Power Selection (Jsbkl1)
EMX-BYT3 User’s Manual 2.3.3 LVDS Back Light power selection (JSBKL1) PWM Mode*(Max current: 2A) DC Mode(Max current: 2A) * Default 2.3.4 AT/ATX Power Mode Select (JSATX1) ATX* * Default 20 EMX-BYT3 User’s Manual... -
Page 21: Clear Cmos (Cmos1)
User’s Manual 2.3.5 Clear CMOS (CMOS1) Protect* Clear CMOS * Default 2.3.6 LCD Inverter connector (JBKL1) Signal Max current LVDS_BKLADJ LVDS_BKLTEN +12V EMX-BYT3 User’s Manual 21... -
Page 22: Serial Port 1~4 Connector (Com14)
Signal PIN PIN Signal NDCDA# NRXDA NTXDA NDTRA# NDSRA# NRTSA# NCTSA# NRIA# NDCDB# NRXDB NTXDB NDTRB# NDSRB# NRTSB# NCTSB# NRIB# NDCDC# NRXDC NTXDC NDTRC# NDSRC# NRTSC# NCTSC# NRIC# NDCDD# NRXDD NTXDD NDTRD# NDSRD# NRTSD# NCTSD# NRID# 22 EMX-BYT3 User’s Manual... -
Page 23: Serial Port 5~8 Connector (Com58)
Signal PIN PIN Signal NDCDE# NRXDE NTXDE NDTRE# NDSRE# NRTSE# NCTSE# NRIE# NDCDF# NRXDF NTXDF NDTRF# NDSRF# NRTSF# NCTSF# NRIF# NDCD7# NRXD7 NTXD7 NDTR7# NDSR7# NRTS7# NCTS7# NRI7# NDCD8# NRXD8 NTXD8 NDTR8# NDSR8# NRTS8# NCTS8# NRI8# EMX-BYT3 User’s Manual 23... -
Page 24: Serial Port 1 Rs485/422 Mode Connector (Jrs485)
Signal 422RX+ 422TX+ 422RX- 422TX- RS-485 Signal PIN PIN Signal 485TX+ 485TX- 2.3.10 Serial Port 2 RS485/422 Mode connector (J2RS485) RS-422 Signal PIN PIN Signal 422RX+ 422TX+ 422RX- 422TX- RS-485 Signal PIN PIN Signal 485TX+ 485TX- 24 EMX-BYT3 User’s Manual... -
Page 25: General Purpose I/O Connector (Dio1)
User’s Manual 2.3.11 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_DATA SMB_CLK 2.3.12 SATA Power connector 1/2 (SPWR1/2) Signal Max current +12V SPWR2 SPWR1 EMX-BYT3 User’s Manual 25... -
Page 26: Power Connector 1 (Pwr1)
EMX-BYT3 User’s Manual 2.3.13 Power connector 1 (PWR1) Signal Signal +VIN_12-24V +VIN_12-24V 2.3.14 Power connector 2 (PWR2) Signal +VIN_12-24V 26 EMX-BYT3 User’s Manual... -
Page 27: Lvds Connector (Lvds1)
2.3.15 LVDS connector (LVDS1) Signal PIN PIN Signal +12V +12V LVDS_ CLK2N LVDS_ CLK1N LVDS_CLK2P LVDS_CLK1P LVDS_DATAN7 LVDS_DATAN6 LVDS_DATAP7 LVDS_DATAP6 LVDS_DATAN5 LVDS_DATAN4 LVDS_DATAP5 LVDS_DATAP4 LVDS_DATAN3 LVDS_DATAN2 LVDS_DATAP3 LVDS_DATAP2 LVDS_DATAN1 LVDS_DATAN0 LVDS_DATAP1 LVDS_DATAP0 EDP_DDC_SCL EDP_DDC_DAT +3.3V +3.3V EMX-BYT3 User’s Manual 27... -
Page 28: Front Audio Connector (Faud1)
2.3.16.1 Signal Description –Front Audio connector (FAUD1) Signal Signal Description LINE2_JD AUDIO IN (LINE_RIN/LIN)sense pin MIC2_JD MIC IN (MIC_RIN/LIN) sense pin 2.3.17 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PLT_RST# LPC_AD2 LPC_FRAME# LPC_AD3 LPC_DEG_CLK LPC_SERIRQ 28 EMX-BYT3 User’s Manual... -
Page 29: Ec_Program (Ec1)
User’s Manual 2.3.18 EC_Program (EC1) Signal PIN PIN Signal +3.3A_ECSPI EC_FSCE# EC_FSCK EC_FSMIOSO EC_FSMOSI EC_HOLD# EC_SMCLK_DBG 10 EC_SMDATA_DBG 2.3.19 PS/2 keyboard & mouse connector (KBMS1) Signal PIN PIN Signal MSCK MSDAT +5VSB KBCK KBDAT EMX-BYT3 User’s Manual 29... -
Page 30: Bios Connector (Bios1)
EMX-BYT3 User’s Manual 2.3.20 BIOS connector (BIOS1) Signal PIN PIN Signal +V1.8A_SPI SPI_ROM_CS0# SPI_ROM_CLK SPI_ROM_R_MISO SPI_ROM_MOSI SPI_ROM_HOLD# 2.3.21 Sony/Philips Digital Interface (SPDIF1) Signal SPDIF_OUT 30 EMX-BYT3 User’s Manual... -
Page 31: Speaker Connector (Spk1)
User’s Manual 2.3.22 Speaker connector (SPK1) Signal LSPK+ LSPK- RSPK+ RSPK- 2.3.23 Miscellaneous setting connector 1 (FPT1) Signal PIN PIN Signal -PWR_BNT -Reset +PWR_BNT +Reset -PWE_LED -HD_LED +PWR_LED +HD_LED EMX-BYT3 User’s Manual 31... -
Page 32: Miscellaneous Setting Connector 2 (Fpt2)
EMX-BYT3 User’s Manual 2.3.24 Miscellaneous setting connector 2 (FPT2) Signal PIN PIN Signal Speaker- BLK_DN BLK_UP BLK_VR(10K) Speaker+ 2.3.25 LED indicator connector 1 (LED1) Signal L1_ACT_P L1_ACT_N L1_100#_LED L1_1000#_LED 32 EMX-BYT3 User’s Manual... -
Page 33: Led Indicator Connector 2 (Led2)
User’s Manual 2.3.26 LED indicator connector 2 (LED2) Signal L2_ACT_P L2_ACT_N L2_100#_LED L2_1000#_LED 2.3.27 CPU fan connector (FAN1) Signal +12V CPU_FANIN CPU_FANOUT EMX-BYT3 User’s Manual 33... -
Page 34: Battery Connector (Bt1)
EMX-BYT3 User’s Manual 2.3.28 Battery connector (BT1) Signal +3.3VSB 2.3.29 USB connector 3 (USB3) Signal Signal USB_DP3 USB_DP2 USB_DN3 USB_DN2 +V5A_USB23 +V5A_USB23 34 EMX-BYT3 User’s Manual... -
Page 35: Bios Setup
User’s Manual 3.BIOS Setup EMX-BYT3 User’s Manual 35... -
Page 36: Introduction
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP 36 EMX-BYT3 User’s Manual... -
Page 37: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. EMX-BYT3 User’s Manual 37... -
Page 38: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 38 EMX-BYT3 User’s Manual... -
Page 39: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. EMX-BYT3 User’s Manual 39... -
Page 40: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 40 EMX-BYT3 User’s Manual... -
Page 41: Trusted Computing
3.6.2.1 Trusted Computing Item Options Description Enables or Disables BIOS support for security device. Disable, Security Device Support O.S. will not show Security Device. TCG EFI protocol Enable[Default] and INT1Ainterface will not be available. 3.6.2.2 APCI Settings EMX-BYT3 User’s Manual 41... -
Page 42: It8528 Super Io Configuration
2 min 10 min 30 min 3.6.2.3 IT8528 Super IO Configuration You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.3.1~ 3.6.2.3.6 for more information. 42 EMX-BYT3 User’s Manual... -
Page 43: Serial Port 1 Configuration
IO=3F8h; IRQ=4; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for Super Change Settings IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO Device. IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; UART 232[Default], Change the Serial Port as RS232/ UART 232 422 485 UART 422, 422/485. UART 485 EMX-BYT3 User’s Manual 43... -
Page 44: Serial Port 2 Configuration
IO=2F8h; IRQ=3; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for super IO Change Settings IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; Device. IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; UART 232[Default], Change the Serial Port as RS232/ UART 232 422 485 UART 422, 422/485. UART 485 44 EMX-BYT3 User’s Manual... -
Page 45: Serial Port 3 Configuration
3.6.2.3.3 Serial Port 3 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled EMX-BYT3 User’s Manual 45... -
Page 46: Serial Port 5 Configuration
3.6.2.3.5 Serial Port 5 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.6 Serial Port 6 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 46 EMX-BYT3 User’s Manual... -
Page 47: Serial Port 7 Configuration
3.6.2.3.7 Serial Port 7 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.8 Serial Port 8 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled EMX-BYT3 User’s Manual 47... -
Page 48: H/W Monitor
EMX-BYT3 User’s Manual 3.6.2.4 H/W Monitor Item Options Description Enabled, Smart Fan Function Enable or Disable Smart Fan. Disabled[Default] 3.6.2.5 S5 RTC Wake Settings 48 EMX-BYT3 User’s Manual... -
Page 49: Serial Port Console Redirection
+ Increase minute(s). 3.6.2.6 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled 3.6.2.7 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. EMX-BYT3 User’s Manual 49... - Page 50 Windows XP SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3.) When enabled, a VMM can utilize the Disabled, Intel Virtualization Technology additional hardware capabilities provided by Enabled[Default] Virtualization Technology. Disable[Default], Power Technology Energy Efficient Enable the power management features. Custom 50 EMX-BYT3 User’s Manual...
-
Page 51: Socket 0 Cpu Information
User’s Manual 3.6.2.7.1 Socket 0 CPU Information 3.6.2.8 PPM Configuration Item Options Description Disabled[Default], CPU C state Report Enable/Disable CPU C state report to OS. Enabled EMX-BYT3 User’s Manual 51... -
Page 52: Ide Configuration
SATA Speed Support Gen1 or Gen2. Gen2[Default] Port0 ODD SATA ODD Port Port1 ODD SATA ODD is Port0 or Port1. No ODD[Default] IDE Mode SATA Mode Select IDE/AHCI. AHCI Mode[Default] Enabled[Default] Serial-ATA Port 0/1 Enable/Disable Serial ATA Port0/1. Disabled, 52 EMX-BYT3 User’s Manual... -
Page 53: Network Stack Configuration
User’s Manual 3.6.2.10 Network Stack Configuration Item Options Description Enabled Network Stack Enable/Disable UEFI Network Stack. Disabled[Default] 3.6.2.11 CSM Configuration Item Options Description Enabled[Default] CSM Support Enable/Disable CSM Support. Disabled, EMX-BYT3 User’s Manual 53... -
Page 54: Usb Configuration
USB devices are Legacy USB Support Disabled connected. DISABLE option will keep USB Auto devices available only for EFI applications. XHCI Hand-off Enabled[Default] This is a workaround for OSew without XHCI 54 EMX-BYT3 User’s Manual... -
Page 55: Security Configuration
CD-ROM to a drive type. 3.6.2.13 Security Configuration Item Options Description Disabled TXE EOP Message Send EOP Message Before Enter OS. Enabled[Default], Intel® AT Enable/Disable BIOS AT Code from Running. Disabled[Default] EMX-BYT3 User’s Manual 55... -
Page 56: Driver Health
Disabled[Default] Inter® AT Platform PBA Enable/Disable BIOS AT Code from Running. Enabled TXE OVERWRITE. NORMAL: OverWrite Pin as high. OVERWRITE TXE OVERWRITE (TXE enabled) OVERWRITE:OverWrite Pin as low. NORMAL[Default] (TXE disabled). 3.6.2.14 Driver Health 3.6.3 Chipset 56 EMX-BYT3 User’s Manual... -
Page 57: North Bridge
User’s Manual 3.6.3.1 North Bridge Item Option Description Dynamic 2 GB 2.25 GB Max TOLUD Maximum Value of TOLUD. 2.5 GB 2.75 GB 3 GB[Default] 3.6.3.1.1 Intel IGD Configuration EMX-BYT3 User’s Manual 57... -
Page 58: Igd - Lcd Control
DVMT Total Gfx Mem 256MB[Default] size used by the Internal Graphics Device. 128MB Aperture Size Select the Aperture Size. 256MB[Default] 3.6.3.1.2 IGD - LCD Control Item Option Description Enabled[Default] Active Internal LVDS(eDP->Ch7511- Active LVDS (Ch7511) to –LVDS). Disabled 58 EMX-BYT3 User’s Manual... - Page 59 LVDS Brightness Control Method. 1.BIOS Brightness Control Method BR Button 2.Brightness Button 3.Variable Resistor. LVDS Back Light PWM Select LVDS back light PWM duty. 100%[Default] 200[Default] LVDS Back Light PWM Select LVDS back light PWM Frequency. Frequency EMX-BYT3 User’s Manual 59...
-
Page 60: South Bridge
EMX-BYT3 User’s Manual 3.6.3.2 South Bridge Item Option Description 11db 14db AUD Gain Setting Select db Value of the AUD Gain. 19db[Default] 25db 3.6.3.2.1 Azalia HD Audio 60 EMX-BYT3 User’s Manual... -
Page 61: Usb Configuration
Azalia will be unconditionally Enabled. Auto = Disabled Azalia will be enabled if present disabled otherwise. Enabled[Default], Azalia HDMI Codec Enable/Disable internal HDMI codec for Azalia. Disabled 3.6.3.2.2 USB Configuration Item Option Description Windows 8.X[Default] OS Selection Android OS Selection. Windows 7 EMX-BYT3 User’s Manual 61... -
Page 62: Pci Express Configuration
3.6.3.2.3 PCI Express Configuration Item Option Description Enabled[Default], Enable or Disable the PCI Express Port PCI Express Port 0/1/2/3 Disabled 0/1/2/3 in the Chipset. Auto[Default] Speed Gen 2 Configure PCIe Port Speed. Gen 1 3.6.4 Security 62 EMX-BYT3 User’s Manual... -
Page 63: Secure Boot Menu
User mode with enrolled Platform Enabled Key(PK) 2.CSM function is disabled. Secure Boot mode selector. ‘Custom’ Mode Standard Secure Boot Mode enables users to change Image Execution Custom[Default] policy and manage Secure Boot Keys. EMX-BYT3 User’s Manual 63... -
Page 64: Key Management
EMX-BYT3 User’s Manual 3.6.4.1.1 Key Management Item Option Description Enabled, Install Factory default Secure Boot Keys Default Key Provision Disabled[Default] when System is in Setup Mode. 3.6.5 Boot 64 EMX-BYT3 User’s Manual... -
Page 65: Save And Exit
This option restores all BIOS settings to the factory default. This option Restore Defaults is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. Launch EFI Shell from Attempts to Launch EFI Shell application (Shellx64.efi) from one of the EMX-BYT3 User’s Manual 65... - Page 66 EMX-BYT3 User’s Manual filesystem device available filesystem devices. 66 EMX-BYT3 User’s Manual...
-
Page 67: Drivers Installation
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. EMX-BYT3 User’s Manual 67... -
Page 68: Install Chipset Driver
Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step1. Click Next. Step 4. Click Finish to complete setup. Step 2. Click Accept. 68 EMX-BYT3 User’s Manual... -
Page 69: Install Txe Driver
If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to continue installation. Step 4. Click Finish to complete setup. Step1. Click Next to start installation. Step 2. Click Next. EMX-BYT3 User’s Manual 69... -
Page 70: Install Vga Driver
Windows 8.1 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Step 5. Click Finish to complete setup. Click Yes to accept license agreement. 70 EMX-BYT3 User’s Manual... -
Page 71: Install Audio Driver
Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup. EMX-BYT3 User’s Manual 71... -
Page 72: Install Ethernet Driver
Windows 8.1 operation system. Step 3. Click Next. Step 4. Click Install to proceed. Step 1. Click Next. Step 2. Click Next to accept license Step 5. Click Finish to complete the setup agreement. 72 EMX-BYT3 User’s Manual... -
Page 73: Install Usb 3.0 Driver
Continue to go on. Step 3. Click Next to continue installation. Step 4. Wait while installing. Step1. Click Next to start installation. Step 2. Click Yes. Step 5. Click Finish to complete setup. EMX-BYT3 User’s Manual 73... -
Page 74: Install Mbi Driver
If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to continue installation. Step 4. Click Finish to complete setup. Step1. Click Next to start installation. Step 2. Click Yes. 74 EMX-BYT3 User’s Manual... -
Page 75: Mechanical Drawing
User’s Manual 5. Mechanical Drawing EMX-BYT3 User’s Manual 75... - Page 76 EMX-BYT3 User’s Manual Unit: mm 76 EMX-BYT3 User’s Manual...
Need help?
Do you have a question about the EMX-BYT3 and is the answer not in the manual?
Questions and answers