Save Changes And Exit; Discard Changes And Exit; Save Changes And Reset; Discard Changes And Reset - Avalue Technology EMX-CDT User Manual

EMX-CDT User's Manual

3.6.6.1 Save Changes and Exit

Use the save changes and reset option to save the changes made to the BIOS options and
to exit the BIOS configuration setup program.

3.6.6.2 Discard Changes and Exit

Use the Discard changes and Exit option to exit the system without saving the changes
made to the BIOS configuration setup program.

3.6.6.3 Save Changes and Reset

Any changes made to BIOS settings are stored in NVRAM. The setup program then exits
and reboots the controller.

3.6.6.4 Discard Changes and Reset

Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The setup program then exits and reboots the controller.

3.6.6.5 Save Changes

Changes made to BIOS settings during this session are committed to NVRAM. The setup
program remains active, allowing further changes.

3.6.6.6 Discard Changes

Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The BIOS setup continues to be active.

3.6.6.7 Restore Defaults

This option restores all BIOS settings to the factory default. This option is useful if the
controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.

3.6.6.8 Save as user defaults

This option saves a copy of the current BIOS settings as the User Defaults. This option is
useful for preserving custom BIOS setup configurations.
EMX-CDT User's Manual 39