Managed Switch System - Mellanox Technologies MTS3600Q-1UNC User Manual

InfiniScale® IV 36-Port QSFP InfiniBand Switch User Manual
With the switch connected to a computer through the MTUSB, it is now possible to reprogram the SPI Flash
memory.
3.2.2.1 Instructions for Reprogramming Through the I2C Port:
1. Make sure that:
the MTUSB I2C cable is connected to the switch and USB cable is connected to a computer
MFT is running on the computer
"mtusb-1" mst device appears in "mst status"
2. Set the MTS3600 I2C switch to allow access by running:
isw -d /dev/mst/mtusb-1 -s shark -p L1
3. Run the burn command:
flint -d /dev/mst/mtusb-1 -i ./fw-IS4-rel-7_0_142-MTS3600Q_A1.bin -qq b
4. Power cycle the switch, by unplugging and re-plugging the power cord, to load the new firm-
ware.

3.3 Managed Switch System

The managed Switch system includes a CPU which contains:
Embedded OS, secure In-band, out-band access
Chassis manager & System BIST
SNMP Agent, 3rd Party tool integration
CLI and GUI
Subnet manager
Performance/provisioning manager
Congestion & notification manager
QoS manager
Adaptive routing manager
Cluster diagnostics manager
Management modules with a CPU will have the capability to allow remote monitoring and remote manage-
ment of the chassis from any host connected to the fabric.
Figure 12: I2C Cable Connected to MTS3600
Mellanox Technologies
17
Rev 1.5