Connecting The Components Of The Phone - Nortel 1120E User Manual

Connecting the components

Connecting the components of the phone

WARNING Your IP Phone 1120E is shipped with the
base locked in position. To avoid damaging your phone,
press the wall-mount lever, located just under the
Handsfree key as indicated in Figure 7 on page 32, to
release the base and pull it away from the phone.
Figure 7: Wall-mount lever
1. Remove the stand cover. Pull upward on the center catch as
indicated in Figure 8, and remove the stand cover. The cable routing
tracks are now accessible.
32
Wall-mount lever