General Information; About This Manual - Kinetico Commercial Plus Softener Series Owner's Manual

CP Softener Series Owners Manual
GENERAL INFORMATION
About This Manual
This manual will cover information needed for the proper installation and operation of your Kinetico Softening
System. We have also included information regarding the frequently asked questions about softening
systems. This information may be more technical in nature, but provides further insight to the continued
operation of this equipment at its highest levels.
This manual will use various icons to help highlight issues that are relevant to the safe operation of this
equipment. The following icons will be used as described:
~
General information regarding the application of this product will be highlighted
V
by this icon. This will include technical specifications and expected operational
results.
/Jr...
A caution icon will be used to present any information that may hold a potential
m,
hazard or concern during the installation, use or maintenance of this product.
Should this information not be followed, it may result in damage to this
equipment and its surroundings.
,ci\
The warning icon will be used to present any information that may result in a
\,1:1'
severe hazard or concern during the installation, use or maintenance of this
product. Should this information not be followed, it may result in severe
physical harm.
Any tools or materials required during the installation, use or maintenance of this
equipment will be preceded by this icon. Using these specific tools will minimize
time and effort. Not using the proper tool may result in damage to this
equipment, its surroundings or even physical harm.
If there are any additional questions pertaining to this equipment, please contact your local Kinetico Dealer for
further assistance.
THE COMMERCIAL PLUS SERIES
The CP Series provides continuous soft water for commercial applications. The unique design of Kinetico's
control valve allows for all softener functions to operate automatically and non-electrically. The system has a
number of options as described:
(00) - Overdrive
The Overdrive feature means both tanks are on-line during service. During regeneration, one tank is
in service and provides water to the regenerating tank. All CP systems are shipped in the Overdrive
mode. The alternating disc is also included. To apply a (s) standard flow configuration, the OD
version would be purchased and modified at the time of install.
(s) - Standard or Alternating Service
This is where one tank is in service and the other tank is regenerating or in stand-by. The (s)
standard feature allows for higher hardness levels to be removed, but offers lower service flow rates.
Rev. 08/09 Kinetico Incorporated • Corporate Headquarters • Newbury, Ohio 44065 • 440-564-9111 Product No. 111600
Page -4