Safety Information - Kinetico Premier Compact User Manual

4

Safety information

Read all information carefully prior to installing and using the
water softener.
Qualified Installer
INSTALLER
Kinetico recommends that a qualified
installer performs the installation. Failure
to install the system as instructed could
invalidate the Limited Warranty.
Water Temperature
Do not install the Kinetico softener in
an area where the water temperature
can exceed 35°C or cause the unit
to freeze. Freezing temperatures will
damage the system.
Kinetico Premier Compact Water Softener Installation Instructions
Water Pressure
2
1
0
Do not install if the supply water pressure
exceeds 6 BAR (87 psi), unless a suitable
pressure regulating valve has been
installed on the softener water supply.
Overflow
VERY IMPORTANT:
Where a cabinet overflow could cause
damage, you must install a 1/2" I.D.
hose to the barbed fitting on the
cabinet and run to a suitable outlet
that is visible and capable of taking the
overflow (i.e. through the outside wall).
Make sure the hose does not go higher
than the barbed fitting as the water
will flow away using gravity.
4
3
5
6
bar