QUICK START - INSTALLATION
WARNING: All rigging fittings and OmniMount™ inserts must be fitted with either optional mounting
hardware or they must remain sealed with the flat-head Allen screws that come installed in the
enclosure. The flat-head Allen screws pass through the Baltic birch plywood panels and fasten to
internal steel rigging brackets, thereby providing structural integrity. All rigging fittings must have
fasteners in place so that the enclosure may be safely 'flown' or suspended overhead.
DANGER: iBOX rigging fittings are rated at a Working Load Limit of 150 lbs (68 kg) with a 15:1 safety
margin. No single rigging fitting should ever be subjected to a load that is greater than 150 lbs. i2W8
rigging fittings are designed to suspend a single i2w8 only. Failure to heed these limits could result in
injury or death!
For more information on installing and operating your iBOX loudspeaker, please refer to the "Installation"
section of this manual or go to Community's web site at www.communitypro.com.
For applications support, service or warranty information, refer to Community's web site or contact
Community at 800-523-4934 or 610-876-3400.
F O R M O R E I N F O R M AT I O N
Community iBOX Installation/Operation Manual — Page 11
Need help?
Do you have a question about the iBOX SERIES and is the answer not in the manual?