Master Arm - Bosch Security System User Manual

MASTER ARM ?

Turn the Entire System On With Delays
Description
Use this function to turn on the entire system, both perimeter
and interior. When you turn the system on, the display shows
how many seconds of exit delay time remain to exit the protected
area. Leave before the exit delay time expires.
Leaving after exit delay expires causes entry delay to start. You
might also cause an alarm on an interior device. Enter your personal
passcode to disarm the system.
This function can be used by your cleaning or service personnel,
or others to turn on your system when they leave.
Using Master Arm:
1. The display shows disarmed idle text.
2. Press the COMMAND bar. The display shows SYSTEM
COMMAND.
3. Press the 1 key.
Note: If you prefer, you might use the Command Menu in place
of steps 2 and 3 to initiate this function. Press the MENU
key to enter the Command Menu, then press NEXT
repeatedly until you reach the MASTER ARM ? prompt.
Press ENT. MASTER ARM ALL ? displays. Press ENT.
4. The display shows ARMING for two seconds, then
displays EXIT NOW # (# = exit delay time remaining).
After the exit delay time expires, the display changes to
idle armed text.
5. To disarm your security system, enter your personal
passcode and press ENT.
1