Turning The System Off (Disarming) - Bosch Security System User Manual

Security system
Hide thumbs Also See for Security System:
Table of Contents

Advertisement

Turning the System Off (Disarming)

Your security system is turned off by entering your personal
passcode. When the system is turned on, you must enter through
a designated entry door to prevent an instant alarm condition.
Opening the door starts entry delay time and the Command
Center emits a pulsing "beep" tone to remind you to turn the
system off. Enter your passcode before the delay time expires
and the system turns off.
If you enter through the wrong door or fail to disarm before the
entry delay time expires, you cause an alarm. If this happens,
silence the alarm (by entering your personal passcode and
pressing ENT) and call your security company to notify them
that it is not an emergency situation.
To Turn Your Security System Off (Disarm):
1.
Enter your personal passcode and press ENT.
2.
You must press the ENT key within 8 seconds of entering
your passcode, or the passcode entry is invalid. The display
returns to idle disarmed text.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents