Perimetr Delay; Turn On The Perimeter With Delays - Bosch Security System User Manual

PERIMETR DELAY ?

Turn On the Perimeter With Delays

Description
In residential systems this function allows you to only arm the
perimeter and exit through a door programmed for exit delay.
The interior of the building remains disarmed. People or pets are
free to move throughout the interior of the premises.
This function is also useful in commercial systems when you are
working before or after business hours and wish to arm the
perimeter. Other system users can enter through doors
programmed for entry delay, which starts the entry delay sounder
and countdown.
Using Perimetr Delay:
1. Interior points are not armed with this command and
might remain faulted while arming with COMMAND 3.
2. Press the COMMAND bar. The display shows SYSTEM
COMMAND.
3. Press the 3 key.
Note: If you prefer, you might use the Command Menu in place
of steps 2 and 3 to initiate this function. Press the MENU
key to enter the Command Menu, then press NEXT
repeatedly until you reach the PERIMETR DELAY ?
prompt. Press ENT.
4. The display shows EXIT NOW # (# = exit delay time
remaining). After the exit delay expires, PERIMETR
DELAYED is displayed.
5. To disarm your security system, enter your personal
passcode and press ENT.
3