Network Menu (Setup>Advanced) - Merging HORUS-AD8 User Manual

Network Menu (Setup>Advanced)
Device Name:
IP Settings:
Address:
Netmask:
Apply & Reboot:
Name of the Horus unit. This name will be broadcast across the network and
will be seen in applications such as the MT Discovery tool. The Horus unit
name can be changed from the Web control access Network page (see section
below for all details)
Manual: Type IP address using box selection and the - or + buttons
Auto: The IP address will automatically be generated by the operating system
for each network interface
Set the IP Address for the Horus unit by using box selection and the - or +
buttons
Set the Subnet Mask for the Horus unit by using box selection and the < or >
buttons
Once changes have been made to this section, you must press this button to
save the settings and power cycle the Horus unit
www.merging.com/horus
Horus User Manual
Page 39