Modules Menu (Setup) - Merging HORUS-AD8 User Manual

Horus User Manual

Modules Menu (Setup)

Module menu will show the available Horus Modules that your Horus has in its configuration
Selecting one of the Modules described below will open the Module I/O configuration menu
Monitor
Shortcut to the Monitor page described above.
A/D N
The A/D buttons, which become active if you have 1 or more AD8(P) modules installed in the Horus
unit, give access to the Input controls. N being a number incrementing from 1 to 6 (when looking from
the rear of the unit number 1 is left top, 6 is bottom right) referring to which of the six slots the module is
inserted into. Please see below for a description of the buttons available.
D/A N
The D/A buttons become active when 1 or more IOC-DA8(P) modules are installed in the Horus unit.
MADI 1-2
MADI 1 port is included as standard with each Horus. MADI 2 will be listed as "EMPTY" in Horus units
which are not fitted with the optional MADI expansion card
AES 1-3
Included as standard. The AES buttons are active since this module is included as standard (as the
MADI 1 module). Connectivity is over 3 D-SUB25 connectors providing 24 channel (12 AES pairs) of
AES-EBU I/O.
www.merging.com/horus Page 41