Installing And Accessing The Horus Control Interface Remotely - Merging HORUS-AD8 User Manual

Installing and accessing the Horus Control interface remotely

To control and view your Horus remotely with a web browser make sure that you are using one of the
Internet browsers below: Google Chrome (Highly Recommended), Mozilla Firefox, Opera, Apple
Safari. * Microsoft Internet Explorer is not supported *
Then take the following steps:
1) If you did not install Pyramix v8 proceed from step 2 to 3. If you have already installed a
Pyramix v8 go directly to step 4)
2) Download the MTDiscovery.exe application to your system (PC or MAC installers are available)
http://www.merging.com/horus/download
3) Make sure your Horus is connected to the same network as your system, and is configured with
the correct IP settings (See "Setting up the Horus IP Address")
4) Launch the MT Discovery tool (MTDiscovery.exe)
Any Horus devices on the network will be discovered by the MT Discovery tool and will appear in the
folder tree under "Ravenna Devices>Horus Devices"
A mouse double-click on the Horus Device entry will open the Horus Web Interface in your
-
default web browser
Only Devices on the same network (same color in display) can have their I/O interconnected
-
* Microsoft Internet Explorer is not recommended for this*
Figure 1 MT Discovery Window
Using the Webpage, you can browse the Menus and change parameters in exactly the same manner
as on the front panel TFT of the Horus unit in question.
www.merging.com/horus
Horus User Manual
Page 47