Modules: Loopback - Merging HORUS-AD8 User Manual

Modules: Loopback

Transparency Check:
Word Length:
Status:
Latency:
Input:
Output Source:
This is a Debug Utility tool that verifies the bit transparency of the audio path
On: Transparency check enabled
Off: Loopback mode enabled
Word length of the digital audio data signal (16 bits or 24 bits)
Green: Path transparency valid
Black: Path is not transparent
Numbering: indicates the number of discontinuities measured
Output to Input delay in samples
Enabling Visible to Ravenna will allow Ravenna to see and use the I/O
Connections (seen in the Auto-Connect utility). Use the Auto-Connect utility to
activate the I/O stream connections
Shortcut to the Output Source Routing Page configuration
www.merging.com/horus
Horus User Manual
Page 44