Table of Contents
Advertisement
None:
Ravenna:
AES 1-3:
MADI 1-2:
A/D N:
Loopback:
Presets Menu (Setup)
Load:
Save:
Auto Save:
Reboot to Factory:
HORUS WEB CONTROL ACCESS
Sets the module so that it does not receive a signal from anywhere. Digital
Mute will be output.
Connects the module to the RAVENNA network and allows any other
RAVENNA device to send signal to it.
Sets the module being configured to receive signal from any of the 3 banks of
4xAES-EBU input pairs.
Enables the module being configured to receive signal from any 8-channel
bank in either of the MADI streams (MADI 2 appears only if the MADI
Expansion Card is fitted.)
Sends the signal coming in from the Mic or Line input modules to the output
module being configured
Should only be used for test purposes.
5 presets banks of different Horus configurations can be loaded (one at a time)
5 presets banks are available to store different Horus configurations
If enabled the save configuration will happen at every 2 minutes.
Note: Since the flash memory which is at the heart of the Horus storage has a
huge (but not infinite) amount of write cycles, we limit the auto-save of all
configuration and PreAmps settings to once every two minutes if (and only if) a
change has occurred meanwhile.
Furthermore, both Shutdown and Reboot buttons (in Setup page) do also
entirely save the current configuration of the Horus prior to power down.
If selected we will reboot the Horus to the default factory configuration. The
Current configuration will be lost but all the saved presets will be kept and can
be reloaded.
www.merging.com/horus
Horus User Manual
Page 46
Advertisement
Table of Contents
