Modules: A/D - AES Sub-Menu
Serial Number:
Type:
Input:
Output Source:
Modules: D/A Sub-Menu
Output attenuation:
Serial Number:
Type:
Input:
Output Source:
This is the place you can access all your Modules serial numbers without
having to unslot them or open the box
Module Type description
Enabling Visible to Ravenna will allow Ravenna to "see" and use the I/O
Connections (seen under the Auto-Connect utility). Use the Auto-Connect utility
to activate the I/O stream connections
Shortcut to the Output Source Routing Page configuration
Calibration of the D/A output (Range -6.0 dB to 0 dB).
Refer to the Hardware section for the D/A onboard output level calibration.
Module serial numbers
Module Type description
Enabling Visible to Ravenna will allow Ravenna to see and use the I/O
Connections (seen in the Auto-Connect utility). Use the Auto-Connect utility to
activate the I/O stream connections
Visual indication of the current Output Source, selecting the source will bring
you to the Routing Page configuration
www.merging.com/horus
Horus User Manual
Page 43