C
Installing and Configuring the Tape
Drive for the NonStop NS-Series
Server
This section contains:
Overview
Installation
Configuration
Overview
A Fibre Channel to SCSI router must be used to connect the 9840 tape drive to the
Fibre Channel ServerNet Adapter (FCSA) on the HP NonStop NS-series server.
Figure C-1
shows how the 9840 tape drive is connected to the server by using the
router.
Note. For Installation and Configuration information for the NonStop S-series server, see the
CT9840-3 Installation and User's Guide.
9840 Tape Drive Operations Guide— 429596-002
C- 1
C-1
C-3
C-8