Table of Contents
Advertisement
9840 Menu System
Figure B-7. Tape Bar Chart
The write bar is in the shaded area. It has a matrixed pattern: only every other dot is
lighted. It shows the tape is 50% written.
The read bar is inside the write bar in the unshaded area to the left. The bar shows up
as an unlit single row lined with a solid-lighted row on each side. It shows that the tape
is 24% read.
Examples of Menu Operations
To become familiar with the functions of the operator panel menus, these pages
provide sample procedures.
How to enter the Menu system
1. Enter the menu system by pressing the Menu switch once.
a. Observe the display and ensure that it shows "Online" or "Offline."
b. If the display does not show "Online" or "Offline," then the user is already in the
menu system: see "How to Repeat or Exit the Menu System" for instructions on
how to exit.
9840 Tape Drive Operations Guide— 429596-002
B -18
Examples of Menu Operations
Advertisement
Table of Contents
