Table of Contents
Advertisement
9840 Menu System
Instructions for Menu Operations
The next few subsections provides instructions for the menu operations. Each
subsection has its own subject:
•
One section deals with how to View SCSI Configurations.
•
The second section deals with how to Change SCSI Configurations.
•
The final section does Drive Operations.
The subsections show all operations sequentially. All the necessary preceding
instructions must be followed.
Full Spelling Vs. Abbreviations in Quotation Marks
Operator panel displays might be shown twice: abbreviated in quotation marks and
with full spelling. Abbreviated spellings in the quotations show exact display
presentation. The full spelling is added to clarify meanings.
"If applicable, press Menu to access"
This is an instruction. It means that you should do one of three things:
1. Do nothing if the user is already at the menu of choice.
2. Press Menu once if you are still at the previous menu and wants access to the
next menu.
3. Press Menu as necessary to reach the menu of choice, or until an Exit Menu is
reached.
"Press Menu to exit to the next sub-menu"
This is an instruction. Pressing Menu once takes the user to the next sub-menu.
Pressing Menu twice will take a menu farther. The user can continue until an Exit
Menu is reached.
Explanation of the Menu Trees
Figure B-4
through
for the menu operations. Each figure has its own subject:
•
Figure B-4
•
Figure B-5
•
Figure B-6
The menu trees show the operator panel switches and displays in the order in which
they are operated and viewed. Only two switches are used for the menu system: Menu
Figure B-6
in this appendix provide graphic operational sequences
views SCSI configurations
changes SCSI configurations
does drive operations
9840 Tape Drive Operations Guide— 429596-002
B- 3
Instructions for Menu Operations
Advertisement
Table of Contents
