Table of Contents
Advertisement
Installing an Internal DLT80
Tape Drive
This chapter describes the procedure to install an HP StorageWorks DLT80 tape
drive into an HP ProLiant server.
Note:
Installing the drive involves the following steps:
1. Setting the SCSI ID on the DLT80 drive
2. Shutting down the server and all peripheral devices
3. Installing the DLT80 drive
4. Reassembling the server
5. Powering on the peripherals
6. Powering on the server
7. Completing the installation
DLT80 Tape Drive Reference Guide
If installing a DLT80 tape drive on an HP AlphaServer, see Chapter 3.
2
19
Advertisement
Table of Contents
