Table of Contents
Advertisement
L700 Tape Library
Antistatic wrist straps with clip-on ends are commercially available.
Opening the Library Front Doors
The front doors on the library must be opened to perform manual operations. Refer to
Figure 6-2 as this procedure is performed.
Figure 4-17. Opening the Access Doors
1. Make sure all jobs have ended and that the tape library is offline.
2. Open the tape library right front door by pulling on the left side of the door.
3. Open the tape library left front door by using a latch key to unlock both locks. Turn
the key counterclockwise to unlock them, then pull open the door.
Moving the Robot
After the tape library doors have been opened, the robot might need to move to make it
easier to access the stored cartridges or the tape drives.
9840 Tape Drive Operations Guide— 429596-002
4- 25
Opening the Library Front Doors
Advertisement
Table of Contents
