L700 Tape Library
Figure 4-15. Drive Power Switch Location
Operating in the Automated Mode
Automated mode is the normal operating mode of the tape library. When the tape
library is online and the robot is mounting and dismounting cartridges, monitor the
server operator console and the tape library operator panel for messages and respond
appropriately.
When a tape library is online, you might also need to:
•
Enter cartridges into the tape library through the cartridge access port (CAP)
•
Eject cartridges from the library through the CAP
•
Replace a cleaning cartridge
•
Manually clean a drive
•
Review the FSC log
•
Run diagnostic tests
9840 Tape Drive Operations Guide— 429596-002
4- 15
Operating in the Automated Mode