Logging On To Switch; Removing Password Protection; Enabling Screen Saver Mode Without Password Protection - HP 263924-002 User Manual

Local Port Operation

Logging on to Switch

To log on to the IP Console Switch:
1. Press any key on the keyboard, or move the mouse. The Password dialog box is
displayed. Enter the password, then click OK.
2. Press the Print Scrn key.

Removing Password Protection

To remove the password protection from the IP Console Switch:
1. From the Main dialog box, click Setup, Security. The Password dialog box is
displayed. Enter the password, then click OK.
2. In the Security dialog box, click the New field and press the Enter key.
-or-
Double-click the New field, leave the New field blank, and press the Enter key.
3. Click the Repeat field and press the Enter key.
-or-
Double-click the Repeat field, leave the Repeat field blank, and press the
Enter key.
4. Click OK if you want to eliminate the password.

Enabling Screen Saver Mode without Password Protection

To enable the screen saver mode without password protection:
1. If your console switch does not require a password to gain access to the Security
dialog box, proceed to step 2.
-or-
If your console switch is password protected, see the previous procedure, then go
to step 2.
2. Select Enable Screen Saver.
6-28 HP IP Console Switch User Guide